02.10.2020

DIY paper origami tree. Master class on creating a three-dimensional tree from paper. Pot of modules for an autumn tree

Autumn is already on the doorstep and I want to somehow express this in creativity, so I propose to do autumn tree in technology origami... The craft will turn out to be unusual. We will use a classic kusudama "Superball" as a crown, and we will make a pot from modules. You will need a paper tube for the barrel.

The model is well suited as a craft for kindergarten and school. The Autumn Festival is approaching. Get ready for it with a beautiful tree in yellow and red tones.

Crown of an autumn tree - kusudama Superball

Let's start with the fun part. Let's make a flower kusudama out of 40 identical modules. Each paper flower is assembled according to the instructions. I advise you to take several autumn shades at once: red, orange, yellow, beige, you can even green. It all depends on your imagination.

Prepare 10x10 cm pieces of paper.Fold each one as follows:

Mark vertical, horizontal and diagonal lines on the sheet.
Fold the Double Square. How to do it is described in detail.
Place a diamond in front of you with the risers at the top. Fold one bottom side towards the center line. Iron the fold well and unfold.
The resulting section of paper must be flattened to form a triangle with the top looking down.
Move one sector to the right and repeat the steps three more times. There should be 4 such triangles in total.
At the formed quadrangle, bend the upper sides to the center so that they are symmetrical. Point the sharp end down. Do three more such actions with the remaining quadrangles. Translate sectors constantly.
A kind of flower came out, but we don't need one. Turn it inside out. To do this, unfold the sheet and assemble in reverse order along the outlined lines. There should be no new folds.
Now we have got what we need. Make 39 more such details.

Assembling the Super Bowl Kusudama

If all the details are ready, it's time to start making the crown for the autumn tree. Distribute the flowers in 10 pieces, spreading them out in a circle. Nearby are details of different colors.

Take a needle and thread. String on 10 pieces, piercing the pointed base of the flower with a needle. After that, pull off the parts and tie the thread. The result is a colored circle. Do the same with the rest.

Prepare two strings and place a cross on a cross in front of you. Cover them with one flower circle and thread the ends from the top and bottom through 2 pieces, on the sides through 3 pieces.

Place the second circle on top. Pass the ends of the rope from the top and bottom through 3 modules. Left and right through 2. The third circle is worn in the same way as the first. The fourth is like the second. All the flowers were on the rope. Tie the opposite ends together by gently tightening to form a ball. Set the kusudama aside.

A pot of modules for an autumn tree

We will make the pot from triangular modules. It's small and doesn't require a lot of build experience. Use a standard base. It is described in detail about it.

For a pot or vase, you will need:

80 brown modules;
36 purple triangles;
36 orange parts;
12 yellow.

Assemble the base with 18 brown modules. In the diagram, these are rows 1 and 2. The triangles are inserted with the short and long sides. The 3rd row is also 18 brown triangles.

Then add one purple part every two brown parts. In the 5th row, alternate the other way around: 2 purple, 1 brown.

Next, use the orange modules as shown in the diagram. While you expose the triangles with long ends (in the diagram, the letter D). In the last row, the modules are put on with their short end outward. Alternate 2 yellow and 3 orange. Glue the modules of the last row for the strength of the craft.

Trunk

It remains to make a trunk for your fall craft. Take a brown A4 sheet and form a tube out of it. Glue the edge of the paper together to keep it from splitting.

Connect the trunk to the crown by gluing it at one end to the kusudame. It is better to do this where the threads are tied.

Cut the other end of the stem, if necessary, to the desired length and glue it into the pot.

The autumn tree using origami technique is ready! You can decorate the craft with a maple leaf made of red or yellow paper. See how to do it.

I wish you warm autumn days and success in your work! Don't forget to subscribe to new articles!

It is not at all difficult to make a beautiful voluminous tree from paper. Follow the instructions, use the template provided, and you will have a branchy, lush crown, a real gorgeous tree.

Materials for work:

4 sheets of brown cardboard;
1-2 sheets of green colored paper;
A simple pencil, scissors, glue stick.

How to make a three-dimensional tree from paper?

Download the template from the link or draw any tree with branches in the area of \u200b\u200bthe roots and crown. It is important that both sides of the tree are completely symmetrical. Therefore, if you decide to draw your own version of the tree, fold the paper in half, draw one part of the tree, cut it out and you will have exactly the same sides.

Cut 4 blanks using a template from brown cardboard.

Fold each in half exactly in the middle.

And then start assembling the plant into a single whole. To do this, first glue 2 blanks in the area of \u200b\u200bthe bent halves, and then two more. You need to glue everything, both branches and roots, but for now only use one bent half.

You already have almost a tree, even two. But this is not the end of the work, because we need a lush and voluminous paper tree.

Therefore, glue together both parts, in the area of \u200b\u200bthe remaining sides.

You will get such a rather dense and very stable tree. It is a little gloomy, but, in principle, like all trees without leaves. But this is fixable.

Draw a small leaf of the desired shape. It can be oblong, rounded, absolutely anything. Perhaps you prefer to make an autumn tree, and for this, replace the green paper with yellow, orange. Fold the paper from which you will cut the leaves into an accordion, and then also this accordion in half, and cut out many leaves at once.

Glue them to the tree, on each twig, wherever there are large voids, to create a lush and spreading crown. The volumetric paper tree is ready.

Origami tree is one of the most popular paper origami. If you do not know how to make an origami tree, then on this page you will find everything you need to assemble this simple paper figure.

In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of the origami tree was taken by one of our site users. He got a tree of a very interesting design. If you have photos of origami collected by you, send them to the address This email address is being protected from spambots. You need JavaScript enabled to view it.

Assembly diagram

Below is a diagram of the assembly of an origami tree from the famous Japanese origami master Fumiaki Shingu. If you follow the instructions carefully, assembling the origami tree will not take much time, and the result will be the same as in the picture. After doing the described in the diagram several times, you will understand how to make an origami tree quickly and without peeping into the diagram.

Video master class

Assembling an origami tree for beginners can seem like a daunting task. Therefore, we advise you to enter the query "origami video tree" on YouTube, the largest video hosting service on the Internet. There you will find many different videos about the origami tree, which clearly show the steps to assemble the tree. We hope that after watching the video of the assembly master class, you will not have any more questions on how to make an origami tree.

Here is a short video tutorial that will allow you to learn how to collect an origami tree:

Alternatively, you can also watch this video and learn how to assemble this simple tree from paper:

Symbolism

The tree has many symbolic meanings. In many cultures, the tree symbolizes the connection between heaven and earth, is a symbol of wisdom and carries the mighty power of nature. The tree is also a symbol of the origin of life and carries the divine essence.

Natalia Plakhteeva

Children love to draw with crayons, wax crayons, paints. Often they pick up crayons, white paper and begin to draw with pleasure the so-called "Kalyaki-malyaki"... The pattern is bright, unique and beautiful. I collect these drawings, my children and I look at them, admire the lines and color combinations. I try not to throw away such "Drawings", but I cut out the brightest fragments. Then children use this "Colored" paper in your art!

I suggest children's master class« Wood in technology« Origami» , and the material for making wood became colored paper tinted in technique"Kalyaki-malyaki".

Preparation method

A 10x10 cm square must be folded diagonally. Then expand

Now bend the bottom corners to the center, as shown in the photo

Bend the outer corners in different directions

Flip to the other side and bend the long narrow end to the top of the square

Fold down as shown in the photo. This will be the support of the trunk wood

Bend the upper front corner inward, forming a lush crown wood

So it happened wood!

And this is a whole grove of autumn trees

According to my observations, children have sufficient skills and abilities in order to begin acquaintance with technique« Origami» ... So far, they are taking the first steps on this interesting creative path and make simple crafts.

Work with each child was carried out individually, so it did not cause any difficulties.

Only a tree can boast of a gorgeous crown, lush foliage and a lot of branches. If you make a tree using the origami technique, then great details are not needed. You should show the trunk below and the gorgeous foliage above. To do this, we take ordinary thin paper, which can be easily bent and deformed.