Parker fountain pen how to refuel. How to write with a fountain pen

Instructions

If you have a standard piston-filled handle, the first step is to unscrew the handle body. Remove the reservoir with the pen from it. Pour the leftovers from the reservoir into the ink jar by turning the clip at its end counterclockwise until it stops. Then dip the nib completely into the ink jar. Turn the clamp clockwise until the reservoir is full. Remove the nib from the inkwell and drain the drop of ink from it by turning the clip in the opposite direction half a turn. Return the piston to its original position. This will remove any bubbles from the ink reservoir. After that, wipe the pen from the remaining dye with a blotter or a lint-free cloth. Place the ink reservoir in the pen body and screw it tight.

A fountain pen with a replaceable cartridge is refilled as follows: unscrew the upper part of the housing counterclockwise. Remove the empty cartridge and reinsert. Open the safety valve to allow ink to flow to the nib. After that, you need to remove it, it could accidentally be in the cartridge, for this, press it a little so that there is a drop of ink on the tip of the pen. Wipe it off with a blotter and put back the top of the pen.

Refilling a pen with a converter mechanism should be done in a similar way as refilling a pen with a piston mechanism. That is, to do this, you need to untwist the pen body, immerse the pen completely in a container with ink. Fill the reservoir with ink by turning the converter knob clockwise. Turn the head half a turn in the opposite direction and squeeze the ink drop back into the ink tank. Wipe the nib with a cloth or blotting paper and again, having assembled the pen, screw the case.

Parker pens are renowned all over the world for their high quality and classic design. As well as being an attribute of prestige, they are ideal for everyday use as well. They are easy to refill with the ability to use ink capsules, a reversible refill system or bubble ink.

Instructions

Handle refill with rotary filler
Unscrew the sleeve. Rotate the plunger down to force air out of the ink reservoir and create a vacuum. To prevent air from entering the filler, completely immerse the pen in the vial and screw the plunger back all the way. Never dip the filler itself into the ink. Remove the nib from the vial, turn the plunger and release a few drops. Screw the piston back all the way. Thus, a small amount of air will enter the tank. This will help prevent ink from leaking out. After cleaning the pen, you can continue with the pen.

Refilling the handle with slide piston filler
Push the lever and move the piston. Submerge the nib completely in the ink bottle. To create a vacuum, push the lever down. Lift the lever up to suck in ink. Remove the pen, release a few drops of ink, and lift the lever all the way up. Then clean the nib. A piece of metal present in the ink reservoir is a component of the refilling system. You do not need to delete it.

For the most, color-coded ink capsules are intended. They are equipped with a reserve tank or additional ink supply that allows about a page. When empty, click on the end to release additional ink.

To replace an empty capsule with a new one, remove the cap from the handle and unscrew the sleeve from the top of the body. Remove the empty capsule and insert the new one wide end first. Push the capsule gently inward. When punctured, a click should be heard. Screw the sleeve back into place.

Related Videos

note

Parker fountain pens should only be refilled with eponymous ink capsules. They contain solvents to clean the handle and minimize the risk of clogging and corrosion. Poor quality ink can damage the pen.

A pen Parker Is a unique thing. When George Parker conceived his creation, he decided: "To do better than others." And he managed to realize his plan: he created a thing that became an attribute of a special culture, high style and exquisite taste. Pen holders Parker - people who have achieved success in life. Especially for such a unique pen, a unique ink was created with which you can refill pento use it over and over again.

Instructions

Feathers Parker have a reversible filling system with bubble ink or capsule Parker... PARKER QUINK capsules have an additional ink supply or are equipped with a reserve bottle. When the capsule is almost empty, click on the end of the capsule. This will release a spare portion of ink.

The amount in the spare capacity will be enough for the page. This figure, of course, varies with the span and width of the pen. The amount of ink in the capsule is enough for a hold of 800 m. In fountain pens Parker only use PARKER capsules, as the inferior quality ink can damage pen.

To refill the pen with a capsule, remove the cap. Unscrew the sleeve from the top of the housing. Remove the capsule filler. Insert a new capsule with the wide end first. Push the capsule gently but firmly with your hand. When you feel it pierce and possibly hear a distinctive sound, stop pushing. Now screw the sleeve back on.

For filling the handle from a bubble, two filler options are used: a standard piston and an exclusive rotary. To refuel pen using a rotary filler, it is necessary to unscrew the sleeve. To create a vacuum, squeeze air out of the ink reservoir by turning the plunger downward.

Dip the pen into the bubble. Make sure it is completely submerged in and out of air. Never dip the filler into the ink, just the pen. Screw the piston back to the limit. Remove the nib from the vial, and, turning the plunger, add three drops of ink. Tighten the piston again to the limit. This is required so that a little is drawn into the reservoir, which will prevent leakage. Clean the pen.

To prime the handle using the piston slider filler, press down on the lever located on the side. This is how you move the piston. Submerge the nib completely into the vial. Push the lever down to create a vacuum and up to suck in the ink. Then remove the nib from the ink. After releasing three drops, raise the lever until it stops. Clean the nib.

More and more people are choosing ink pens as a writing instrument for everyday use. Nowadays, when writing with a computer keyboard, it's a pretty welcome change, and the idea of \u200b\u200bchoosing a good pen for special occasions is very tempting. Often, ink pen enthusiasts have several copies for daily use. However, there comes a time when the ink runs out, and it becomes necessary to refill your beloved pen.

Despite the fact that ballpoint and gel pens have long replaced fountain pens, many people prefer ink. And the ink pen of the world famous company Parker is not only a stationery, but also an attribute of prestige. To enjoy using it, you need to know how to refill the pen with ink and nib.

How to refill a fountain pen

In stationery stores, several types of ink are usually presented, which differ in shades, consistency and quality. For refilling ink pens, ink marked "fountain pens", that is, "for fountain pens", is suitable. How you fill the pen with ink depends on the refilling mechanism.

Piston filler

1. Disassemble the handle body.
2. Inside the housing is an ink plunger with a clip at the end that must be rotated counterclockwise.
3. With the pen immersed in the ink, turn the clip all the way in the opposite direction.
4. To remove air from the container, the clamp must be slightly unscrewed until the first drop appears.
5. Wipe the pen with a cloth and assemble the pen.

Converter

1. Release access to the converter.
2. With the pen in ink, turn the converter head to the right.
3. Remove air from the container, clean the pen and screw the body.

Replacement cartridge

1. Remove the upper part of the housing.
2. Replace the used cartridge with a new one.
3. Open the safety valve, release air until ink appears.
4. Wipe the pen dry and twist the body.

How to refill a Parker pen

The Parker pen is not only a writing instrument, but also a stylish accessory for a business person. To extend the lifespan of this expensive item, only refill it with branded inks, as Parker ink capsules contain cleaning solvents. In addition, Parker ink meets a number of other requirements:

• keep saturated color for a long time;
• are instantly absorbed into the writing material;
• have a high wetting ability without spreading over the paper;
• correspond to the density of the handle design.

Parker pens have an ink cartridge refill system. To replace the capsule, remove the cap and unscrew the sleeve located on top of the body. After removing the empty capsule, a new one is inserted into its place with the wide side down. To pierce the capsule, you need to push it slightly and screw the sleeve.

Parker QUINK capsules are equipped with a reserve container. To release additional ink, just click on the end of the capsule.

Many modern people prefer to use ballpoint pens, but there are those who still prefer fountain pen elegance, clarity and personal style. Instead of a ball, a sharp nib is installed at the end of such a pen, leaving behind lines of varying thickness, depending on the pressure on the pen, the writing speed and the direction of specific strokes. Plus, the fountain pen can be refilled with ink many times, so it can last a lifetime. However, fountain pens are used in a slightly different way from ballpoint pens. Once you have learned the proper writing technique, you will find it much easier to write with a fountain pen.

Steps

Part 1

Grasp the handle correctly. Remove the cap from the handle and take it in your main hand, gently squeezing it between your thumb and forefinger. In this case, the body of the handle should rest on the middle finger. Use the rest of your fingers to rest on the paper to stabilize your hand.

Place the nib of the pen on the paper. This may sound simple enough to do, but the design of a fountain pen is somewhat more complex than a ballpoint pen. Because of the pointed nib, instead of the ball at the end, the pen must be properly applied to the paper so that it can write. This is the so-called optimal position.

Hold the handle firmly. When writing, there are two ways to control the pen: with your fingers or your hand in general. When you work with a ballpoint pen, it is quite possible to do with only your fingers, since thanks to the ball, the pen will write in any position. But the fountain pen needs to be controlled with the whole hand so as not to miss the optimal position. Therefore, use the recommendations below.

• With the pen in your hand, keep your fingers and wrist steady, using your entire hand while writing to move the pen. Practice writing in the air first and then on paper to gradually get used to writing with your whole hand.

1. Press lightly on the pen while writing. You don't need to press hard on the fountain pen, however, you should apply some pressure on the nib for ink to flow into it. Press down gently on the nib and begin practicing writing with the fountain pen.

   Part 2

   How to fill a fountain pen with ink

   1. Determine the type of fountain pen. Today, you can find three types of fountain pens on sale: with cartridges, converters and an integrated piston system. The difference between the two lies in the ink delivery system and the way the pen is filled with ink when it runs out.

      • Cartridge fountain pens are most commonly used today, as cartridge replacement is the easiest to change. To write with this type of pen, you will need to buy ready-made ink cartridges and periodically replace them in the pen when ink runs out.
      • The converter pens are equipped with a refillable cartridge that fits inside. They are perfect for you if you don't mind refilling the ink cartridge yourself every time they run out.
      • Piston handles are similar to converter knobs, except that they have an integrated filling system, so you don't have to replace the refillable cartridge with a converter sold separately.

   2. Replace the fountain pen cartridge. First remove or unscrew the cap from the handle, then unscrew its body. Take out the empty cartridge from the inside. Then follow the steps below with the new cartridge.

   3. Fill the piston handle. Remove the cap from the nib and, if necessary, the extra cap at the back of the pen that covers the piston mechanism. Rotate the plunger adjuster (usually counterclockwise) so that the plunger is at the nib end of the pen. Then follow the steps below.

      • Dip the nib completely into the ink jar so that the ink hides the hole at the base of the nib.
      • Start turning the plunger clockwise to draw ink into the pen.
      • When the ink bottle is full, remove the pen from the ink bottle. Rotate the plunger a little counterclockwise again to let a few drops of ink back into the jar. This will get rid of air bubbles.
      • Wipe the ink off the nib with a tissue.

   4. Fill the converter handle. There are two types of converters in fountain pens: with a piston mechanism or with a pipette filling system. To refill a pen with a pipette system, remove the cap from the pen, unscrew its barrel, dip the pen in ink, then follow the steps below.

      • Slowly press down on the ink reservoir and wait for air bubbles to appear on the ink surface.
      • Release the ink reservoir slowly and wait for it to fill with ink.
      • Repeat the above steps until the reservoir is full.

   Part 3

   How to use pen nibs correctly

   1. Choose the right nib for your everyday writing. There are many different types of fountain pen nibs that are designed to be used in different situations and to create a variety of effects. For daily writing, opt for:

      • feather with a rounded end, leaving behind a uniform line;
      • small pen, writing in thin lines;
      • a stiff nib that extends slightly to the sides so it won't break under pressure when you press it in an attempt to create bolder lines.

   2. Choose nibs for decorative writing. To write in decorative or calligraphic handwriting, you will not use the pens used for everyday writing. Instead, opt for one of the options below.

      • Use a blunt nib for calligraphy, which will be wider and flatter than rounded nibs. These pens can create both wide and narrow lines: vertical strokes will correspond to the width of the nib, and horizontal strokes will be thin.
      • Use wider feathers to create thicker lines. Calligraphy nibs are usually available in five sizes: very narrow, narrow, medium, wide and very wide.
      • Flexible and semi-flexible nibs allow you to control the width of your strokes by increasing or decreasing pressure when writing.

Despite all the variety of stationery, the fountain pen is still very popular. Parker Pen Company is one of the well-known companies specializing in the production of such writing instruments. It is she who is the creator of the famous brand "Parker". But are the fountain pens from this manufacturer so good?

A small excursion into history

Who would have thought that the first analogs of modern fountain pens appeared around 600 AD? e. However, they acquired a metal case only by 1803. In turn, the first pens with metal nibs appeared towards the beginning of 1830. However, such office supplies had an extremely short lifespan.

Not long before the modern Parker fountain pen appeared, many manufacturers began to produce nibs made of rhodium, osmium, iridium, as well as gold (meaning 14- and 17-card). This approach extended the service life of the pen nibs and initiated a new series production.

What types of fountain pens are there?

By about the beginning of the 19th century, the following types of fountain pens could be distinguished:

• representative, or image (collection accessories);
• classic (for everyday use);
• school.

All of them, like the Parker fountain pen, were equipped with the following details:

• A body equipped with a special filling mechanism.
• A special reservoir for ink.
• Protective cap.
• A metal nib with a slight split in the middle.

Pen "Parker" (fountain pen): photo and features

Parker are unique pens that have a number of advantages. In particular, it is they who create the clearest and thinnest lines, which makes your writing smooth and light. Such a pen is much more comfortable to hold, and the writing of letters itself occurs in a fairly fast mode.

From the point of view of aesthetics, the text written with such stationery looks the most accurate and calligraphic. That is why the Parker fountain pen is the favorite tool of employees and office owners, students and school teachers.

Depending on the cost, they prefer to use it as a fashion item that goes well with a leather case, wallet and a business person's notebook.

What do people say about Parker fountain pens?

Anyone who has ever been fortunate enough to hold Parker in their hands speaks of it mostly positively. Some people like the ease that comes with writing.

Others pay attention to the presence of a streamlined shape and presentable appearance of the accessory, which allows it to be used as a gift. Still others pay attention to the aesthetics of writing and claim that the "Parker" fountain pen (you will find reviews about it in our article) even influenced their handwriting. It has become more calligraphic and accurate. By the way, knowing such unusual possibilities of "Parker", in some European schools teachers use its budget version when teaching children to write in primary grades.

Still others claim that pens sometimes scratch paper. The fifth does not like wasteful ink consumption. According to them, they end at the most inopportune moment.

And, finally, there are and are not satisfied with the presence of ink on the end of the pen (meaning that after using an accessory, ink often remains on its nib, which then dries up). Another thing is that such dissatisfaction may well be caused by improper use of the pen or associated with its inexpensive analogue. However, mostly reviews, for example, on such a stylish item as a gold fountain pen "Parker", positive.

Where does the fountain pen ink go?

To prevent your pen from letting you down at the most crucial moment, take care of its timely refueling. To do this, recall that pen stationery, as a rule, contains an ink cartridge or a special piston converter. Moreover, the first is not intended for reuse, and the second has a large capacity, and it can be used many times.

However, priming a piston converter takes longer than replacing an old ink cartridge with a new one. The second process is much faster and easier. For the first one, you need a certain setting and a small jar of special ink. How to fill in the ink for the Parker fountain pen will be described below.

How can I refill a Parker pen with a converter?

To refill a pen equipped with a converter, first prepare your work area. To do this, place a napkin and a jar of ink on a flat surface (preferably a table). This task is best handled by ink from the same company as the pen itself.

Next, you should remove the protective cap of your stationery and carefully unscrew the barrel from the feather base. Then unscrew the ink cap and set it aside (on a napkin). Then dip the pen into the bottle. At the same time, leave only the upper part of the feather on the surface.

In the next step, get rid of the remaining ink in the reservoir. This can be done by turning the converter piston counterclockwise (you should move it all the way). This simple action should be performed before three drops of ink fall into the can.

Without changing the position of the knob, continue to rotate the converter, but in the opposite direction. This way you can fill the reservoir with a new batch of ink. When everything is done, gently stick the pen out of the jar and rotate the converter with rotating movements (as described above). This will get rid of the small amount of air trapped in the ink container.

Then replace the barrel, and also remove excess ink with a napkin. Now you know how to refill the Parker fountain pen containing the converter.

How to refill a Parker pen with a cartridge?

To replace a used cartridge with a new one, first remove the protective cap. Then carefully remove the empty container and replace it with a full one. And apply a little effort: press on the reservoir with your fingers until you hear a characteristic loud click. And only after your cartridge is fully installed, you can slowly tighten the barrel. The handle is now ready to use.

How do I clean a nib in a Parker pen?

If you suddenly decide to clean the pen in a pen with a converter, then first you should open the converter, and then bring it to a previously prepared container with water at room temperature and rinse it. Moreover, it is worth performing this procedure until the water in the converter becomes completely transparent. At the end of this step, blot the nib and the pen itself with a napkin.

In the event that your pen contains a cartridge, it is recommended that you remove it before flushing the pen. Then transfer the nib and pen body to a container of clean water. Rinse and dry with a tissue.

The ink pen is a great accessory for business people. It emphasizes the high status of a person, makes his handwriting smoother and more accurate, and turns the writing of the text into a whole ritual. You need to know how to properly fill and use such a pen.

How to refill an ink pen

These pens are of two types: with a cartridge and with a converter. In the first case, everything is as simple as possible. You need to unscrew the handle, take out the empty cartridge, put in a new one and push until a characteristic click, which will mean that the feeder has entered the inside of the cartridge.

Ink pen - business person style element

However, if you are a fan of the classics, give preference to a pen with a converter. Refueling is a little more difficult, but over time you will adjust and will do it quickly.

• Prepare ink of the desired color and a couple of paper towels.
• Disassemble the pen - unscrew the barrel from the nib. You should have the pen and the converter attached to it in your hands.
• Dip the pen into the liquid so that the metal part is completely submerged in the pen and the body of the pen remains dry.
• Rotate the envelope handle and twist the plunger.
• As soon as you reach the stop, begin to unwind the handle back. At this time, you will see how the container fills with ink.
• Remove the nib from the liquid, twist the plunger slightly so that the drop returns to the ink tank, and screw it back in. This is to protect the handle from leaking.
• Dry the handle with a tissue and assemble.

Be extremely careful during assembly and disassembly. Ink pens are very fragile, so one awkward movement can break them.

How to use the nib pen

Do not press down on the ink pen. It should slide easily on the sheet. Do not use a pen on glossy paper. This paper does not absorb ink.

Always use fresh ink only. One year after production, the ink is already considered old

All that remains is to figure out how to paint an ink pen if it doesn't write. This usually happens after it has not been used for a long time. There is no need to scribble or press on with a pen. Just hold the nib under warm running water. When she dries up, she will start writing again.

If you do not plan to use the pen for a long time, it is best to remove the remaining ink and clean it before storing. Ink completely dried inside can permanently ruin such a pen.

A pen with ink is a wonderful gift. After a person learns how to use it and fill it, such a pen will become an integral part of his style.