How to rinse a comb. How to clean your hair brush with natural bristles. How to Clean Plastic Product

In order to look attractive every day, you need to carefully carefully care for hair. Daily use solves giving up bristles of dust, dirt, leather flakes, fat discharges, residues of laying. All this gives her an untidy look and increases the risk of hair and scalp. In order to protect your health, it is important to know how to clean the comb at home.

Read in this article:

The first steps

The question of what and how to clean the comb from dirt and hair, asks every happy owner luxurious chapelurs, whether it is a man or woman. This is because there is always a risk of buying a new scallop, which in its composition may not approach your type of skin and hair.

In order to clear it in high quality, it is necessary to correctly understand what material it is produced and what bristle is on it.

Types of bumps

1. Wooden
2. Metal
3. Plastic
4. Natural bristle comb

Also for proper selection The method of cleaning, it is necessary to take into account its form.

Cleaning wooden rome

Fashion first

First you need to carefully clean the wooden teeth from the hair. From the quality of the stage of the stage, in the future the whole process will depend on.

Moisten a cotton swab or a soft cloth with medical alcohol or other alcohol solution. Please note that it is impossible to use products with strong abrasive substances. Thoroughly wipe with a cotton swab everybath. Alcohol has a favorably affect the dissolution of fat and other balances of the installation. Conduct this procedure to complete the base from the dirt. Wipe the dry product and leave it completely dry.

If, after the first procedure, your grazing has not fully pulled from dirt, perform the procedure again.

A wooden comb, like a tree of wood, is very afraid of a long exposure to water, so in no case clean and do not rinse it under running water.

Method of the second

For this method will require conventional wet wipes. Fully clean the cloves from the hair felling. Apply a small number ammona alcohol on a napkin. It is necessary to enhance the cleaning effect. Wipe the wooden scallop and each of its teeth. From the quality of cleaning in the future will depend on its operation. Leave a wooden scallop for drying for 24 hours.

Purification of plastic rollers

Fashion first

First you need to clean the hair dropped. If a simple movements Hands are not removed, use any remedy - toothpick, knife or needle. In the case of the presence of a thick layer of dirt or fat on the teeth, remove them with the same knife or needle. Type with a small container with warm water and dig 1 tablespoon of ammonic alcohol in it, a little shampoo or detergent and stir carefully. Make a plastic scallop in the resulting solution and leave a sound one hour. After the specified time, remove and rinse well under running water.

In the case of dirt residues, wipe it with a tight sponge.

Method of the second

Initially, it is necessary to clean from the remaining hair.

Mix a little ordinary toothpaste with detergent for dishes or shampoo. Apply the resulting solution on the scallop and thoroughly clean the resulting dirt and fat, with the help of an unnecessary toothbrush or other means with a bristle.

The main condition for this method is, then the brush is gross bristle. Clean the cleaning until the entire plaque is removed. Rinse under running water and dry.

Cleaning metallic rollers

Before cleaning the hair comb, you need to prepare two bowls. In one plump a small amount food SodaAnd in the second, make a soda solution. To do this, pour three tablespoons in a bowl and fill with water. Next, it is necessary to wash it from obvious dirt and fat residues. Alternately wet the sides of the metal scallop into the solution, and then in the undivided soda. Further, the side on which the soda is located, it is necessary to carefully wipe the rude sponge or cloth, until all the dirt and the remains of fat come down. After that, thoroughly rinse with running water and dry well.

Cleaning massage combs

The massage scallop has a friend structure of teeth than the usual combs, and therefore the process of cleaning it is a bit difficult.

Before cleaning a massage comb, it is necessary to completely remove the remnants of hair on it. To facilitate this procedure, you need to take plastic or metal comb And by swinging, remove them. Type one liter of water to the container and distribute 1 spoonful of table vinegar and 3 spoons of shampoo. Place the massage scallop in the resulting solution and leave a rush for 10 minutes. Remove it well under running water and dried.

Cleaning Combs with a natural pile

Natural bristles, very well breeds skin fat throughout the length of hair, which has favorable influence on their health. Going out of its qualities, such a scallop is very quickly contaminated, and therefore it is necessary to clean the bristle 1 time per month.

First of all, you need to clean the teeth from the hair. Pour water into a small vessel and dig soap or shampoo to foaming in it. Mandatory condition is the use of funds whose does not include silicone. Add 5 drops of ammonic alcohol to the resulting solution. Its use will allow short time Fully split fat. Immerse the scallop into the tank of the pile down and leave in this position for 10 minutes. First, clean the bristle with your hands from dirt, and then with the help of an old toothbrush or a rough sponge. Place the scallop on the towel of the pile down and let dry the natural way.

Preventive comb care measures

1. After each comb, remove the hair balances.
2. Rinse every week with soap mortar.
3. Natural pile Weekly clean the dry way with hand and other scallop.
4. Map with wet napkins every day.
5. Scallop is individual Hair care, and therefore it is not recommended to transmit it to other people.

Compliance with elementary preventive Merallow you to contain your comb in perfect condition.

When combing the GDID and lice, it is necessary to throw a towel on the shoulders, or produce this procedure over the bathroom to wash them off. To choose everything, hair should be wet. We start from the roots to the tips, carefully, small strands.

Attention! When carrying out this procedure, those who conduct it should secure themselves: put on gloves, bathrobe and hide your hair under a handkerchief or under a rubber hat, since a high probability is infected.

We produce this procedure for three days and every day. A week later, repeat once again. The towel, which was covered shoulders, need to boil and stroke the iron on both sides.

On the long Voloch You have to choose the incomeSince little likelihood that you can remove everyone with the crest. Especially carefully viewing on the occipital and temporal part of the head.

Those who have children go to kindergarten, I must inspect the child's hair in the evening. When lice detected, it is necessary to inform the educator for further prevention in the institution.

Do I need to disinfect objects for combing when pediculose?

Reference! Disinfection of things has great importance. Things are boiled, and things for treatment are drained with boiling water or washed in a special solution and are rinsed in running water. If they discovered in the house, it is necessary to disinfect everything, with which this person comes into contact.

What can be wrapped, erased and plunge on the sun. Mattresses, blankets, fur coats or render on the cold (if winter), two hours, or please in the sun. Stuffed Toys You can pack hermetically in cellophane for two weeks.

Floor and everything else washed with vinegar solution. Bags with garbage immediately throw away.

What and how to treat comb, hairpins and crests?

First, from all devices we remove all the hair we make a soap solution: an economic soap is added to a liter of water and two tablespoons of soda, dissolve. Water should turn out not very soapy and begin to rinse (process) and brushing to capture all the places between the teeth.

After treatment, we rinse all items in running water and dried on a cloth or a towel to glass all water. This procedure can be carried out more often to protect yourself from the re-attack of lice.

How often repeat the procedure?

If every week you will be washed, wash, linens Purchase, rinse combat, then the probability will become infected, it will be minimal. Twice a week wash your head. Children to teach use only their own things and hairpins.

Personal hygiene objects are better handled every 7 days, and it is better to replace it in a year. As needed you can make cleaning with a cotton disk and alcohol or vodka, Turning all the teeth and rinse with water. Plastic and metal is better to rinse in the soap solution and rinse.

The appearance of these insects can be in a prosperous familyshould not panic. If you comply with all prevention measures and process all items, with which an infected person comes into contact, in a week you will get rid of this problem with great success.

But periodically it is necessary to check in order to continue to protect yourself from it. Since nowadays no one is insured from this.

The question of how to clean the comb from hair and dirt is very relevant. This is one of the most polluting things. This is what they use daily, and in the process of using hair and fenced hair, and particles of varnishes, mousses, foams, skin fat and the smallest particles of the skin accumulate on it. Cleansing combs is the necessary stage of hygiene that prevents dandruff and pollution of just washed hair. Clean the tool follows 1-2 times a week.

It is important not just to clean the comb from dirt, but choose the suitable and type of procedure suitable. Only in this case the instrument will serve you for a long time. Health of hair depends on purity, hair health, so you should not neglect this question.

Cleaning depending on the material of manufacture

Miscellaneous required different care. This is especially true if the tool is expensive and you do not want it to quickly come into disrepair. Follow these recommendations:

1. 1 wooden. Such solvent is often recommended for professionals for hair care. They are environmentally friendly. At the same time, this material is quite capricient. It is forbidden to put a tree for a long time in water. This can lead to deformation. How to peel off a comb at home? You need to use a cotton swab, impregnated in vodka or alcohol. Tampon should wipe comb. This method has several actions: alcohol eliminates fat deposits, and cotton neutralizes dirt, dust, small particles. If the tool is strongly contaminated, the procedure should be repeated.
2. 2 plastic. It is rather easy to care material. The procedure begins with cleansing the tool from the remaining hair by means of toothpicks. Then it is necessary to dissolve in warm water of 30 ml of ammonic alcohol and shampoo. The tool falls into the water for 20 minutes. During this time, there is peeling sediments, residues cosmetics, dirt, dandruff. After 20 minutes, the instrument in running water should be solid, carefully laundering it from the detergent. Remaining pollution? Remove the remnants with soda. It is applied to the old toothbrushWith the help of which the cleaning procedure is performed. If the comb was used on her hair with lice, it should be disinfected. To do this, a 10% chlorine solution is useful. You should soak into the solution tool, wait half an hour and wash off the remnants.
3. 3 metal. Such tools are quite rare, as they are too tough, can damage gentle skin Heads. But if you have such a brush, you should observe special precautions when cleaning. After the cleansing procedure, it is necessary to dry well tool. IN otherwise Corrosion will gradually form on it.
4. 4 from natural bristles. Previously need to remove the remaining hair with a toothpick. Wash tool S. natural bristle It should be particularly carefully, because the value of it is high and it is designed for long-term use. To do this, you can use a toothbrush and shampoo. The brush with a long bristle acquired in a business store will simplify the process of cleaning the massage product from natural bristles.

Each material has its own characteristics, and therefore clean it in different ways.

Methods in accordance with the form of the product

How to Clean Comb? To do this, it is worth considering her form. Ordinary brushes are cleaned quite simple, for massage and round Products A special approach will be required:

1. 1 round. The full cleaning of such a tool is hampered due to the form, therefore many dirt accumulates on a round comb, and this further complicates the task. First of all, you will need to remove all the remaining hair. For this uses toothpick. After in warm water in equal proportions, shampoo, ammonia alcohol and hydrogen peroxide are added. The brush is left in the washing composition for an hour, after which it is necessary to wash off all the remains of soap. If you clean the tool with strong contaminants, you can use the brush from the old carcass to the eyelashes. Previously, it should be well rinsed from the remnants of the cosmetic agent. The brush copes with the smallest hairs, and with dust, and with fatty sediments.
2. 2 massage. You can remove hair remnants by flat comb. Then you should cook detergery: 1 l warm water, 2 spoons of shampoo, 3 spoons of 9% vinegar. The tool holds as part of 5 minutes, after which it is left to dry.
3. 3 brushes-brush. Such solvents have the property of accumulating dirt, hair. Clean them is not easy. How to peel off a comb at home? For this, as in other cases, it is necessary to remove the remaining hair through the toothpicks. Then the detergent composition is prepared: soap, alcohol and hydrogen peroxide. The brush is left in water with a solution for an hour.

Method using soda and vinegar

This is one of the most effective methodsSince soda helps to fight with the most imbued pollution, and vinegar dissolves fat. The procedure is as follows:

1. 1 From the brush, the remaining hairs are removed. You can do this by a corner of a narrow comb, toothpick, needles. It is enough to hold the tool between the grooves, and then collect liberated hair.
2. 2 in warm water is added 1 spoon of soda and 1-2 spoons of vinegar. You can apply apple or dining vinegar. Comb falls into the solution and keeps it in it for 5-10 minutes.
3. 3 The remaining contaminants are signed by a toothbrush.
4. 4 The product is washed under running water.
5. 5 Sew the tool follows to the tooth down.

The cleaning method is not suitable for wooden, rubber soft products, brushes made of genuine bristles. This materials do not benefit the procedure using soda. It is better to choose a more sparing option for them.

Application Washing Tools

This is a gentle method that allows you to handle the product of any forms and materials. How to clean the comb using a dishwashing tool? Follow these recommendations:

1. 1 Pre-remove the remaining hairs from the product.
2. 2 in the container dial warm water. Add to it aware of dishes. It is advisable to choose products aimed at combating fat. Hold the brush in a solution of 5-7 minutes.
3. 3 Take a toothbrush. Apply to it a means for washing dishes and start cleaning the cloves up to the base.
4. 4 Wash the solution with warm water and put comb drying on a towel prepared by cloth up.

In this way, you can wash even a soft rubber product. However, water should be warm, not hot.

1. 1 It is desirable to remove the accumulated hair from the product every evening. It will help to prevent strong pollution.
2. 2 Wash comb is recommended for at least once a week.
3. 3 Particularly important to regular care for wooden productsSince it is not recommended to wash it, and dry processing will not allow you to cope with complex pollution. This measure will protect the tool from deformation and separation.
4. 4 It is recommended to clean the brush from pollution before using it on clean hairoh. This will allow you to prevent pollution of the hair remaining on the tool particles of varnish, oil and other cosmetics.
5. 5 When using vinegar in the procedure, add a few drops of essential oil to the resulting composition. It will help get rid of the bitter smell of vinegar, and also give the brush your favorite flavor.
6. 6 If you need to remove the hairs from the tool, it is much easier to do it if you are mixed.
7. 7 products must be carefully dried. In some of them moisture can be collected, which provokes the rise of mold.

Following these recommendations will help you save the main hair tools clean and order. At the same time, you will not need to spend a lot of time to eliminate the remaining fat and small particles. All methods involve the use of simple components.

Regular care will protect products from severe pollution and will prolong their operation.

Over time, contamination accumulates, which are an excellent medium for breeding malicious bacteria and dust ticks. Regular cleaning of the product - important hygienic procedure. Correct care It will avoid the emergence of a number of hair diseases and scalp.

What do you threaten the dirty calculation

Skin fat, particles of varnish, foams and other cosmetic means cover the discrepancy with an invisible film, which instantly stick dust and trash present in the bag, cosmetic bag or on the shelf. Pollution is transferred to the hair, because of what even the washed hair is quickly becoming untidy.The health of the hair and the skin of the head directly depends on purity. In addition, big cluster Memorious brush hairs automatically cease to perform their functions.

Dirty calculation can be the source of diseases of the scalp

Regular care for this accessory suggests its cleansing at least 1-2 times a week.. When choosing a cleaning method, you should pay attention to the material from which the product is made.

Before you go to wet cleaning or washing, remove the hair stuck in the teeth using any acute subject, for example, toothpicks or manicure scissors. You can use a special device, which is a bundle of thin metal rods with curved ends, fixed on a small handle.

With the help of a special tool Easy to remove hair stuck in comb

Wooden scallops and massage - less water

These accessories will not tolerate long contact with water.

1. Prepare a solution of 1/2 bag citric acidbroken in 1 liter of water, or take medical alcohol. The use of ammonic alcohol may entail a darkening of natural wood.
2. Dry the rag in the selected composition and exhibit pollution.
3. Dry the product natural way.

Wood hair accessories do not tolerate water contact

Massage outlet of the tree Clean the old toothbrush using a solution of citric acid, the alcohol is unsafe for rubber base. Act quickly, and after removing all the contaminants, immediately get into the product with a dry cloth and clean the cloves from the remnants of the vehicle with a piece of velvet or cotton wand.

Always dry the massage comb cloves down.

Massage calculus made of wood, clean with citric acid

It is not recommended to soak wooden calculations in soap solutions, since the material from which they are made will swell and loses the shape of moisture.

Video: Wood cleaners cleaning

Plastic calculations - easy to soak

These accessories are not afraid of almost any cleaning products. One of simple options Actions:

Plastics calculations can be mashed in various detergent solutions

If the plastic calculation was used to remove the lice, disinfect it in a 10 percent solution of chlorine lime by placing the product for half an hour.

Soda for darkened metal ridges

For cleaning these calculations, soda will suit:

Metal calculations after cleaning using water you need to immediately wipe dry

How to clean brush-brush and calculus with natural bristles

Use soap solid and ammonia alcohol. Procedure:

1. Remove your hair from the brush, but do not squeeze them from the bristle nests.
2. Immerse the product into a soap solution (1 tbsp. L. Shampoo or stricken household soap on 1 liter of water), add 1 tbsp. l. ammonia.
3. If the calcination is made of plastic, soak it for 1 hour, and if from the metal - for 10 minutes.
4. Rinse the brush in clean water.
5. Dry the hair dryer by choosing the cold air supply mode.

Brush-brush clean with a soap solution with ammonia alcohol, but not soaked for a long time if the base is metallic

Express fashion with foam

You can also use shaving foam:

Prevention

1. After using the product to destination immediately, remove the hairs from it.
2. Clean the cleaning one or twice a week.
3. Use a protective case if we carry the accessory in the bag.
4. Do not let other people use your personal cash.
5. Change the product every 4 months.

Video: how to care for comb

Regular cleansing of calculation - the only way Protect hair from dirt that accumulates on unwashed accessories. Choose money and cleaning methods depending on the type of product, do not forget to change your brushes and scallops on time.

Cutting gradually collect hair and dirt, skin fat and the smallest particles of the skin, the remains of mousses, varnishes and other similar means. And if the classic crest made of wood or plastic with teeth clear is easy, then problems arise when cleaning a round curl or brush.

Any product needs to be cleaned once or twice a week. Health and purity of this product depends on the quality and purity of this product. appearance hair. Let's look at how to quickly clean the comb from hair and dirt depending on the type of tool and the material from which it is made.

Rules for cleaning and caring for the comb

• Before cleaning and soaking, be sure to remove the hair. To simplify the procedure, pre-moisten a comb. If there is a lot of hair, apply needle, toothpick, or a thin knife. For large brushes, you can take a thin flat comb or an old cleaned brush for eyelashes;
• It is important to clean not only a bristle, but also a handle. At this part, the calcination accumulates big number harmful bacteria and microbes that are easy to remove if you regularly wipe the handle cotton disc, moistened in alcohol or vodka. After processing, wipe the surface with a damp pure cloth;
• For wood, it is impossible to use various detergents, incl. Shampoos, cleaning solutions for dishes and so on. You can not soak the comb made of wood in the washing solution and wash in the water!;
• Brushes with a pillow can not be mashed in water for too long, otherwise they are deformed. For cleaning, you can wipe the pillow with a cotton disk, moistened in alcohol;
• After washing, thoroughly dry the comb, otherwise the mold may appear on the product and harmful microbes develop. A wooden comb is deformed and lost a presentable appearance;
• Remove your hair with combs every day to prevent the formation of strong pollution and accumulation of microbes, ensure the safety of the hair product;
• Wash the tools with the use of cleaning agents one or twice a week;
• Clean the brush, curl or ridge before applying a clean hair tool, and not after;
• If you use vinegar, add two or three drops to a solution of any essential oil to eliminate the bitter smell of the means and give the product a pleasant fragrance. By the way, essential oils, especially pink, lavender or rosemary, will help;
• If the comb was used for hair with lice, the product must be disinfected. To do this, take a 10% chlorine solution and soak the tool for 30 minutes, then rinse the remnants of the product in clean water and dry the comb.

Plastic comb

Plastics tools are most popular due to availability, easy use and care. Before cleaning the comb at home, remove your hair with your fingers. If they are stuck, use toothpick, needle, scissors, or thin knife.

In warm water, throw 30 ml of shampoo and 20-30 ml of ammonia. Instead of shampoo, you can take detergent For dishes or liquid neutral soap. Put the product to the prepared composition for 20 minutes and then rinse the product in pure running water.

Old and strong pollution cleans the soda. To do this, apply a means for a toothbrush, thoroughly clean the bristle and the surface of the product. In addition, you can prepare a solution from one spoon of soda and two spoons of vinegar. Place the comb part of five to ten minutes and the remnants of contaminants, remove the brush for cleaning the teeth.

After the procedures, rinse the comb in clean water and put on a towel until complete drying. Soda perfectly eliminates old and emerged pollution, and vinegar effectively dissolves and removes fat. In addition, such a remedy cleans the yellowness and helps to whiten the plastic. Read more, how to care for plastic products, read.

Wood comb

Clean the wooden comb is quite difficult, as the tree is an eco-friendly and capricious material that does not like water and moisture. Excess humidity can deform natural woodAs a result, the material will deteriorate and stall. At the same time, such products are considered the most safe and environmentally friendly, gentle and hair useful.

To safely clean the wooden tool take a cotton swab and soaked in alcohol or vodka. Then the tampon rubbing the comb. This cleaning effectively eliminates fat deposits, dust and dirt. When leaving and operating, try not to water the wooden comb, do not soak the tool in detergents or cleaning solutions and do not wash in the water!

Metal comb

Metal and iron combs are rare enough, as it is a heavy and not very user-friendly tool. However, they are indispensable when creating high and lush hairstyles, hairstyles with separate curls and strands. To clear the metal or iron comb from dirt, fat, cosmetics and hair, the method is also suitable using soda.

For cleaning, dip the toothbrush in soda powder and wipe the surface of the product. Repeat the procedure until you completely remove the dirt. Then slip the material under clean warm water, spread it on the towel and carefully dry, because the metal is subject to corrosion. Avoid long-term contacts with water.

How to Clean the Brush: Classic, Round and Brash

To clear a round or classic brush, first assemble the hands maximum amount hair. If some hair is stuck, get them with a toothpick or an old pre-peeled brush from carcasses for eyelashes. Use a soft soap solution for cleaning. Mix a small amount of shampoo or dishwashing tools with warm water.

Soak in a prepared solution toothbrush, and then with this brush carefully and carefully wipe the comb at the location of the bristles and on the sides of the tool, since the dirt also accumulates there. Well clean the curl and then rinse under the crane in clean hot wateruntil the soap solution is completely mad.

To clean the brush-brush, prepare the cleaning agent of the mixture liquid soap, alcohol and hydrogen peroxide. Instead of liquid soap, you can take a detergent for dishes or shampoo or grate solid soap On the grater and dissolve in water until the foam is obtained. Put the brash in the cooked solution for an hour and then rinse under the jet warm clean water, if necessary, clean the product with a toothbrush.

After aquatic and cleaning procedures, wipe round curl, brush or conventional brush with a dry cloth or paper towel And leave to dry when room temperature. You can not wipe the tool, but immediately send to be dried. Spread the product on the towel.

Massage brush and comb with genuine bristles

Before cleaning a massage comb, remove your hair with your hands, with a toothpick or flat calculus. Then prepare the washing solution from liter of water, two tablespoons of shampoo and three teaspoons of 9% vinegar. Put the brush into the prepared composition for five minutes, and then leave to dry.

If a massage brush Or another type is made of genuine bristles, apply a toothbrush and gentle solution with a shampoo or cleaning agent for dishes. To eliminate strong contaminants, soak the product in a soap solution for five to seven minutes.

After that, clean the product with a toothbrush, rinse and leave dry. It will simplify the process of cleaning a special brush with a long bristle, which can be bought in every business store.