How to clean the comb with genuine bristle. Rules of care for metallic comb. What to do with a round brush

Clean and well-groomed hair - the best decoration of a woman. They need to be careful, for this we use combs, massages and panshi.

The appearance of the hair depends on the use of these accessories, and their ability to transfer environmental impact is polluted air, poor weather and so on. By paying attention to the massage, it is possible for having fallen hairs, according to the presence of fat and dust on it, determine their condition.

How to clean and disinfection accessories with households:

  • We use the means with which my dishes, well-splitting fat. We prepare the solution, put a comb into it for 7 minutes, clean the teeth with a toothbrush, rinse with a warm water, put on to dry on the fabric.
  • An efficient means is a food soda, helping to extort any contamination and vinegar dissolving fat. We remove hair with a comb, lower it into an aqueous solution, with the addition of soda - one spoon and vinegar - two spoons for 10 minutes.

    We consider pollution with a toothbrush, rinse with water, better running. Envy.

  • Shampoo active substances and a small amount of ammonic alcohol are well removed from dirt, fat and varnish polluted surface brush. It is soaked for 20 minutes.
  • Disinfecting comb is carried out by any antiseptic: alcohol, or hydrogen peroxide. It is possible even simply cologne or chlorine solution.

    We wipe your voice disc, or simply splash on the accessory from the sprayer, or soaked in a solution for 5 minutes. The main thing is thoroughly rinse the tools after processing under running water.

Note! Massage comb with dried cloth up, as well as brushes.

Resperating woman will never hahone clean hair with a dirty brush.

Clean out of various materials

It is necessary to take seriously to how to properly clean accessories for hairstyles. Tools can be made from various materials and require an individual approach to the cleansing procedure.

Comb from wood, environmentally friendly material. More careful care is required. Wooden comb put in order with dry cleaning.

Wipe with a cloth, pre-dipped with alcoholic solution, pay attention to each teeth.

Note! Wooden tools can be deformed from moisture, which appeared burrs will cling to the hairs.

Massage with cloths from natural bristles. We remove the hair remaining on the tooth. Wash brushes take every week shampoo with warm water.

We apply to cleanse from contamination a shop with an elongated bristle.

Tools with metal and plastic surfaces. Plastic and metal metal comb clean with any soap solution, previously removed from her garbage, for which we use toothpick.

Hold in a solution for about 20 minutes, rinse. If the contamination did not exceed completely - we use soda.

If you need to disinfect brushes, we use any antiseptic agent.

Do not forget about corrosion, which may appear if the tool is poorly dried.

Note! The remnants of the hair are removed in different ways, depending on the shape of combs: round clean the toothpicks, a massage - with a flat combing or knitting needles.

Brushing

Brashing is called a brush with a round base and bristles of metal or natural material. She makes styling and hairstyles.

Brashikha happen:

  • Ordinary simple and thermal, which are used in conjunction with a hairdryer.
  • With genuine or artificial bristle.
  • With cloths of different stiffness.
  • With more frequent or rare arrangement of teeth.
  • With different base diameters.
  • With bases made of metal, ceramics, wood and plastics.

Specialists know what purpose varieties are used round brush. To create a bulk hairstyle take a tool with a diameter of up to 8 cm; For coaching, Kudrey use a comb with small bristles made of metal; Straighten the disobedient hair with brash with horse or pork bristles.

Note! In Brushcans, the hair was confused - their hair is not allowed. It is better to unravel them after leaving hot air from a hair dryer and smeared with a spray for glitter.

After that, you can pull out the strands of the hair with a pointed stick: the tip of combs, a pencil, or a special stick to create samples.

It is more difficult for a circular brush than other tools, dirt and hair dropped. To remove them take a toothpick or knitted needles. We clean brush in the soap solution, alcohol and hydrogen peroxide, keep in it for 1 hour, pollution is easily washed off.

Hairdressers advise:

  • If the hair brush is very contaminated, we put it into a solution with hydrogen peroxide, ammonic alcohol and liquid soap. Allocate with a strong jet of water aimed at brush cloves.

    Use clean comb is one of the important rules for compliance with hygienic standards and preserving the health of your hair. Well-groomed and beautiful hairstyle is the most important part of the image, health and pride of any person.

    Useful video

      Related records

Comb - an indispensable personality for man with care. With repeated contact with the hair during the day, a variety of contaminants accumulate during the day. With subsequent application, all this is transferred to the crest on the hair, and a new layer sticks to the tooth. But there should be no problems in how to clean the comb, it should not arise, because it is very simple procedures.

In the hair and on the skin of the head constantly formed dirt. It immediately sticks to the crest when combing, which is eventually covered with a gray bold fallow, consisting of dandruff flakes and burned skin and dust particles.

And cosmetic tools - lacquers for hair, foam, gels make it all stick to the scallop even more.

Use contaminated tools very harmful for hair. And it's not just that it is immediately dirty even a wicked head.

It is terrible that infection is entered on the skin with mud, and this is already fraught with very serious problems.

Cleaning with domestic products

Anyone who follows their appearance and health, well know how to clean the comb from hair and dirt homemade ways.

And this can be done like this:

It is useful to know how clear massage comb At home.

Make it with a round comb (massage or brush) a little more complicated than flattened. To cleanse it is desirable to use spice or toothpick: They will be comfortable to fit and pull out from the head and stuck their hair in the massage, as well as to produce directly cleaning the above-described technicians.

With any method, the massage after processing you need to carefully dry.

Combs from different materials

Tools for combing hair can be made from different materials, and the process of cleansing from dirt will be in each case to have its subtleties:

How to wash hairbrush - it is best to ask hairdressers. They know exactly how to do it right and willingly share their

Combing hair falls several times during the day. Skin fat, hair, particles of varnishes, foam and other hair care products accumulate on a comb. Therefore, it is very important to clean this tool regularly. Otherwise, hair will be faster to pollute and lose fresh look. In addition, you can encounter the advent of dandruff and itching the scalp. Optimally brushing comb once a week. In order not to spoil the tool, it is necessary to choose a suitable method for cleansing.

It is very important to maintain hygienicity of combs for hair, because this tool interacts every day with head and hair.

Thanks to several ordinary tips, you can save the appearance and properties of the comb:

  1. After each combing, you should clean the hair with combing hair. Especially this recommendation is relevant for the owners of long hair.
  2. To clean the comb you need at least once a week.
  3. Special attention is paid to combless wood. For this material, only dry cleansing is suitable, which cannot be cope with the solar pollution. Therefore, it is necessary to clean the cleaning.
  4. If a vinegar is used when washing the product, then a successful solution will add several drops of favorite essential oil to the solution. This will help cope with the smell of vinegar and enjoy the aromaradstone.
  5. Delete from the tool stuck hair will be easier if you wash them.
  6. In order not to form mold and the material did not begin to settle, you need to dry the comb after washing well.

Material Rask

Today, on the shelves, you can find combing out of various materials: wood, plastics, metal, etc. They are suitable for different types of hair and serve for different purposes.

In order not to damage the product, it is important to know how to clean the comb from a particular material.

Wooden

Combus from wood is considered natural and environmentally friendly. In addition, they do not damage the hair, keeping them healthy and beautiful. Therefore, such products are quite popular.

A tree in no case can be washed with water. It is unacceptable to use soap and other detergents. This can lead to deformation and stratification of the material.

Cleaning wooden can take place in several stages:

  • It should be removed from the tool that fell hair.
  • Moisten a cotton disk in alcohol, vodka or hydrogen peroxide. The alcohol removes the flare perfectly, and the cotton disk removes dust and particles for hair care products.
  • Thoroughly wipe the surface and teeth until the fat layer remains on it.
  • Be sure to dry the wooden product. It is better to do it, rubbed the comb dry cloth.

Plastic

In contrast to wooden comb, plastic products are unpretentious in care. They can be mashed in water and use almost any detergents.

You can wash the plastic comb using the following effective way:

  1. Remove excess hair. It can be a toothpick, needle or a small knife.
  2. In warm water, it should be dissolved on 1 large spoon of shampoo and ammonia alcohol.
  3. Soak comb in a cooked solution for 30 minutes.
  4. Pretty rinse the tool to finally wash off the remnants of plaque and detergents.
  5. If the contamination is not completely labeled, you can apply a little soda to an unnecessary toothbrush and wash off the remaining flare.

Metal

Metal is less common. They are tough and are not suitable for daily use, as they can damage the scalp. But this tool is great for creating evening hairstyles and curls. Even in case of an infrequent use of a metal product needs special care.

The main thing is to carefully dry the metal comb, otherwise it can rust.

The process of cleansing the metal product consists of the following steps:

  • mix the unnecessary toothbrush with water and dip it in Soda;
  • wet the comb;
  • wipe with a toothbrush product until it removes the plaque;
  • rinse under running water;
  • he dried well tool.

From natural bristles

Brushes made of natural bristles are pretty in demand. It is believed that they are best carrying out hair. Such products are quite expensive and used for a long time. But they are capricious in cleaning and quickly collect dust due to the close arrangement of the brush hairs. In addition, such products can not be mashed in water, as the bristles can be powered. Therefore, it is very important to care for them.

First you need to get rid of stuck hair. It is convenient to do with rare teeth crest, which can be purchased in a household store at the lowest price. Scallicle should be combeding the hair and accumulated dust from the brush with natural bristles.

Then it is necessary to moisten a cotton plate with hydrogen peroxide or acetylsalicylic acid and wipe it with a bristle.

Another way is to use an old toothbrush and shampoo.

Form of the race

Combs differ in the market and form. Massage, round, brushes-brush have their own features in use.

Depending on the shape of the product, the purification methods can be distinguished at home.

Massage

The procedure for washing a massage brush must be as follows:

  1. To begin with, you should free the comb from excess hair. It is better to do a flat scallop, carefully sipping the teeth, trying not to damage them.
  2. Soak tool in a specially prepared solution for 5-10 minutes.
  3. Rinse the product under running water.
  4. Thoroughly dry the massage, putting it on a clean dry towel.

Recipes for making a solution for cleansing a massage brush:

  • mix a liter of warm water, 2 large spoons of shampoo and 3 spoons of 9% vinegar;
  • add soap to 1 liter of water and after soaking additionally wipe the comb with an unnecessary toothbrush.

Round

Because of its form, the round comb shall accumulate a lot of plates. In addition, it is more difficult to remove the hair from it than with any other comb. Therefore, it is desirable to get rid of excess hair after each combing.

Wash the product of the circular shape in this way:

  1. With a toothpick or needle, carefully free the tool from the intricate hair.
  2. Prepare a container in which a comb is placed. Add warm water there.
  3. In equal proportions, mix the peroxide, ammonia, shampoo and add this mixture into warm water.
  4. Soak product for an hour.
  5. If after an hour the flight did not come completely, you can use a toothbrush. Also perfectly fit an unnecessary brush from carcasses for eyelashes. It must be laundered from the remains of the cosmetic. It is able to cope with the smallest hairs, dust and a fatty raid.
  6. After you need to rinse the comb and thoroughly dry it.

Brush-brush

Combs-brush or brushes rectifiers accumulate a large amount of dirt, they are easily confused by hair, however, such products can be cleaned. Stages of the procedure will be similar to the above actions:

  • get stuck hair with toothpick;
  • prepare a solution of soap, alcohol and peroxide;
  • soak product in this mixture for an hour;
  • mechanically remove dirt residues;
  • rinse brush-brush and dry it.

Cutting gradually collect hair and dirt, skin fat and the smallest particles of the skin, the remains of mousses, varnishes and other similar means. And if the classic crest made of wood or plastic with teeth clear is easy, then problems arise when cleaning a round curl or brush.

Any product needs to be cleaned once or twice a week. The health and appearance of the hair depends on the quality and purity of this product. Let's look at how to quickly clean the comb from hair and dirt depending on the type of tool and the material from which it is made.

Rules for cleaning and caring for the comb

  • Before cleaning and soaking, be sure to remove the hair. To simplify the procedure, pre-moisten a comb. If there is a lot of hair, apply needle, toothpick, or a thin knife. For large brushes, you can take a thin flat comb or an old cleaned brush for eyelashes;
  • It is important to clean not only a bristle, but also a handle. A large number of harmful bacteria and microbes are accumulated on this part of this part, which are easy to remove, if you regularly wipe the handle with a cotton disk, moistened in alcohol or vodka. After processing, wipe the surface with a damp pure cloth;
  • For wood, it is impossible to use various detergents, incl. Shampoos, cleaning solutions for dishes and so on. You can not soak the comb made of wood in the washing solution and wash in the water!;
  • Brushes with a pillow can not be mashed in water for too long, otherwise they are deformed. For cleaning, you can wipe the pillow with a cotton disk, moistened in alcohol;
  • After washing, thoroughly dry the comb, otherwise the mold may appear on the product and harmful microbes develop. A wooden comb is deformed and lost a presentable appearance;
  • Remove your hair with combs every day to prevent the formation of strong pollution and accumulation of microbes, ensure the safety of the hair product;
  • Wash the tools with the use of cleaning agents one or twice a week;
  • Clean the brush, curl or ridge before applying a clean hair tool, and not after;
  • If you use vinegar, add two or three drops to a solution of any essential oil to eliminate the bitter smell of the means and give the product a pleasant fragrance. By the way, essential oils, especially pink, lavender or rosemary, will help;
  • If the comb was used for hair with lice, the product must be disinfected. To do this, take a 10% chlorine solution and soak the tool for 30 minutes, then rinse the remnants of the product in clean water and dry the comb.

Plastic comb

Plastics tools are most popular due to accessibility, easy use and care. Before cleaning the comb at home, remove your hair with your fingers. If they are stuck, use toothpick, needle, scissors, or thin knife.

In warm water, throw 30 ml of shampoo and 20-30 ml of ammonia. Instead of shampoo, you can take a detergent for dishes or liquid neutral soap. Put the product to the prepared composition for 20 minutes and then rinse the product in pure running water.

Old and strong pollution cleans the soda. To do this, apply a means for a toothbrush, thoroughly clean the bristle and the surface of the product. In addition, you can prepare a solution from one spoon of soda and two spoons of vinegar. Place the comb part of five to ten minutes and the remnants of contaminants, remove the brush for cleaning the teeth.

After the procedures, rinse the comb in clean water and put on a towel until complete drying. Soda perfectly eliminates old and emerged pollution, and vinegar effectively dissolves and removes fat. In addition, such a remedy cleans the yellowness and helps to whiten the plastic. Read more, how to care for plastic products, read.

Wood comb

Clean the wooden comb is quite difficult, as the tree is an eco-friendly and capricious material that does not like water and moisture. Excessive humidity can deform natural wood, as a result, the material will deteriorate and will stall. At the same time, such products are considered the most safe and environmentally friendly, gentle and hair useful.

To safely clean the wooden tool take a cotton swab and soaked in alcohol or vodka. Then the tampon rubbing the comb. This cleaning effectively eliminates fat deposits, dust and dirt. When leaving and operating, try not to water the wooden comb, do not soak the tool in detergents or cleaning solutions and do not wash in the water!

Metal comb

Metal and iron combs are rare enough, as it is a heavy and not very user-friendly tool. However, they are indispensable when creating high and lush hairstyles, hairstyles with separate curls and strands. To clear the metal or iron comb from dirt, fat, cosmetics and hair, the method is also suitable using soda.

For cleaning, dip the toothbrush in soda powder and wipe the surface of the product. Repeat the procedure until you completely remove the dirt. Then slip the material under clean warm water, spread it on the towel and carefully dry, because the metal is subject to corrosion. Avoid long-term contacts with water.

How to Clean the Brush: Classic, Round and Brash

To clear a round or classic brush, first assemble the maximum amount of hair with your hands. If some hair is stuck, get them with a toothpick or an old pre-peeled brush from carcasses for eyelashes. Use a soft soap solution for cleaning. Mix a small amount of shampoo or dishwashing tools with warm water.

Soak in a prepared solution toothbrush, and then with this brush carefully and carefully wipe the comb at the location of the bristles and on the sides of the tool, since the dirt also accumulates there. Clean the curl well and then rinse under the crane in clean hot water until the soap solution is completely mad.

To clean the brush-brush, prepare a cleaning agent of a mixture of liquid soap, alcohol and hydrogen peroxide. Instead of liquid soap, you can take a detergent for dishes or shampoo or grate solid soap and dissolve in water until the foam is obtained. Put the brush in the cooked solution for an hour and then rinse under the jet of warm clean water, clean the product with a toothbrush.

After aquatic and cleaning procedures, wipe a round curl, a brush or a conventional brush with a dry cloth or a paper towel and leave dry at room temperature. You can not wipe the tool, but immediately send to be dried. Spread the product on the towel.

Massage brush and comb with genuine bristles

Before cleaning a massage comb, remove your hair with your hands, with a toothpick or flat calculus. Then prepare the washing solution from liter of water, two tablespoons of shampoo and three teaspoons of 9% vinegar. Put the brush into the prepared composition for five minutes, and then leave to dry.

If a massage brush or other type is made of genuine bristles, use a toothbrush and gentle solution with a shampoo or cleaning agent for dishes. To eliminate strong contaminants, soak the product in a soap solution for five to seven minutes.

After that, clean the product with a toothbrush, rinse and leave dry. It will simplify the process of cleaning a special brush with a long bristle, which can be bought in every business store.

12/21/2016 3 10 792 views

How to wash the hairbrush for hair from dirt and fat at home? Features of the product care depending on its type can be found by reading this article.

Why do you need to wash a comb regularly?

Comb is the necessary attribute of any female dressing table. After all, hair should look neat, be carefully laid. With this subject, all sorts of hairstyles are made, haircuts and small curls.

Comber there are different species, but they all periodically become dirty, stinging hair. Therefore, it takes to clean the irreplaceable thing at once.

How often should it be changed?

In order for no hair problems, it was possible to make a spectacular hairstyle or lay a haircut, care is required not only for the longest, but also for scallops. You should also not forget to change the old one to be healthy.

How to wash hairbrush?

Any hostess will not be difficult to wash the comb's comb. There are several ways to clean this thing. It is important which material is used for its manufacture.

The most relevant these days:

  • from wood;
  • from metal;
  • from natural bristles;
  • massage;
  • round and some others.

In order for the structure to be made completely damaged, and the cloves were perfectly cleaned, and the processing means coped with a contaminated surface, it is necessary to select the cleaning method, based on the manufacturing material.

Plastic

In this case, the manipulation will be simple. Plastics have good resistance to various substances. Initially, the hairs are removed among the teeth. If the hairs are excessive amount, and they are confused between the tooth, they can be removed by the sharp end of the toothpick. Methods for further processing:

Combus from light metal is very common in everyday life from modern girls. Significant specific techniques and their purification from dirt:

  • Sometimes you can take advantage of the usual washing powder "Bioran" or similar to it. It will be necessary to pre-apply on the brush. The active ingredients included in the powder composition are perfectly split fats. After the procedure, the comb is rinsed under a crane with running water so that there are no cleaner particles. Then it helps to dry the towel, then use again.
  • To clearly clean the interdental spaces, again use powder for styrics. The third part of the hand is poured into warm water. When the substance is dissolved, dip the crack and hold 60 minutes. After the water is rinsed under a jet or in a volumetric basin, be sure to be dried in order to avoid the appearance of rust, and are used as intended.

Wooden

A tree is a natural material, some substances can harm him. Cleaning Tips:

  1. It is impossible to allow the Wooden Comb for a long time in the water for a long time in the water, so that the tree did not smell, and it did not come to a dissent state.
  2. Effective and safe alcohol-containing solution. A cotton swab, moistened in it, will need to rub the cloves. As a result, skin fat on the teeth and the sticky dust will dissolve. Little tampon is subject to even contaminated gaps between the teeth, and all the unclean will be removed.

Massage

  • Hands or with the help of acute items with combs hair removed. It is necessary in order for cleaning to be more efficient, and the hair is delayed dirt, dust and skin fat.
  • To remove contaminants with a massage, it will be necessary to prepare a special solution: vinegar (9%, 3 tbsp. Spoons) + shampoo (2 tbsp. Spoons) + slightly thermal water (liter). The mixture is well cleaned so that it turns out a foam on the surface, then it is dipped into it a massage brush and kept in a solution of 10 to 15 minutes.
  • After rinsing, the comb is dried on a flat surface in heat.

From natural bristles

Dirt and dust can be removed using shampoo. Comb is cleaned by hair, a small amount of the aforementioned means is applied to it, it is distributed over the entire brush, to the tooth. So the comb leaves for 10 - 15 minutes, then it dip in warm water to rinse well from pollution and shampoo.

Next, the comb is rugged in pure water. It will definitely need to dry in such a way that the bristles look up, thereby it is possible to exclude the deformation of the object from the natural material. When the brush dried, you can use it again.

Video: How to wash the comb at home?

If you have found an error, please select a text fragment and press Ctrl + Enter.