: As a rule, when describing one or another method of closing the loops, the last loop is not discussed. Often, as a result of fixing the working thread, a nodule is obtained by the edge of the product. I will give an example description of the closing of the loops by stretching. This method is attractive in that it gives a smooth pigtail along the edge and, moreover, it is very simply performed.

It is most often used to close the loops in direct areas of knitting. It can be scarves, details of clothes with straight endings, socks, etc. Using for cycle and sweeper mating, openwork patterns and other smooth canvases ...

The closure of loops with the knitting needles is performed as follows:

Initially, as when knitting a conventional series, you need to remove the first (edge) loop and leave it not accused.The second loop, we are tied by the pattern, facial or invalid viscous.

The left needle must be brought to the edge loop, enter it into the loop and pull out a little on itself, and pull out the right spin through the edge, the second loop, which we have just accumulated.On the right spice, we still have one loop, and the edge is removed from the needles and closes.

In the same way, respectively, the pattern, knit the next loop. We again have two loops on the right spice. Further, we also bring the left needle under the edge right loop, pulling away a little on myself, and we just stretch the loop through extreme.
Again on the needle there should be one loop. Now two loops must be closed.
Thus, they see all the loops until the latter. We should have a pigtail around the edge.
The last loop, which remained on the right spice, should be transferred to the left, while we cut the thread and stretch it through the last loop.

Description Taken from here

In the video, this way is shown this way of closing the loops, but the last loop and the fastening of the thread are obtained by themselves. Of course, many of us do not pay attention to this "trifle" because, like me, leave a rather long piece of the working thread, to then use it for the connecting seam. But if you think about knitting in the technique of Patchwork, then this moment will already seem important.

And now the most important thing: how to "defeat" the last loop. The first video is the only Russian language that I managed to find.

Interestingly, foreign knitters made a few videos on this topic. I chose two of them:

Most often, knitting any detail ends with the closure of the loops, otherwise the knitted canvas will bloom. There are several ways to close the loops.

Closing one loop

1. Remove the edge loop on the right spin. Check the next loop face. On the right spice it turned out 2 loops.

2. Enter the left needle in the edge loop and stretch through it the first stick loop.

3. On the right spice will remain one loop. Thus, close all the loops until the end of the row.

4. Then cut the thread, leaving a small segment. Enter the remaining segment in the loop and roll it. Try the tension of the closed row loops was the same as the hinges of the knitted canvas.

Closing two loops

1. Check the edge and first hinges together for the rear walls of the facial.

2. The new loop is rolled off with the right spokes to the left and check it with the next loop in the same way as the first two. Thus, close all the loops until the end of the row.

3. Then cut the thread, leaving a small segment. Enter the remaining segment into the last loop and roll it.

Closing loops in a sleeve or neck

This method is used when closing the loops in the armor of the sleeve or neck. In the first row, close the desired number of loops. An invalid row is lied unchanged. In the next row, remove the first loop. The 2nd loop should be facial and stretch through it the first loop. With this method of closing hinges, the edge is obtained smooth, without sudden drops.

Closing of the hinges of gum 2 x 2 without the use of the needle

1. In the face row 2 facial loops sudden face. On the right spice it turned out 2 facial loops.

2. Enter the left needle in the first facial loop and stretch through it the second clutch loop. On the right spice will remain one loop.

3. The next hovern loop is in charge. Will the left needle in the loop on the right spice and stretch it through it the connected hover loop.

04.05.2018

How to close the loops with the needles? Elastic closure of loops: do it yourself with a description

Proper closure of loops with knitting needles at the end of knitting will provide the product to save the correct form. The school was taught only to one way, but in fact, a different approach for each pattern. If the knitter creates its product for the first time according to the scheme, it is faced with the lack of a description of the end of work. To learn this simply.

Close the edge on one loop

This method obtains free pigtail, which stretches. Therefore, such an elastic closure of loops with the knitting needles is used to complete the last row of knitting things with any pattern and rubber band. The sequence of action is:

1. Remove the first, and the next loop to the drawing.
2. Spinning in the left hand to hook the edge and drag through it a stick loop. Only one loop will remain on the right.
3. To penetrate the subsequent loop in the drawing and repeat the actions.

So should be done until the last loop, so that the loop only remained on the right side. To tear off the thread, leaving an end to 4-5 cm, and turn through the loop, knotting on it. While working should be followed so that the pigtail is not delayed, but remained free.

Close the edge of two loops

Such a closure of loops with knitting needles should not be used for the finished drawing of the gum, since the resulting pigtail will not reach. It is also important to take into account the thickness of the yarn and her looseness, trying not to pull the product. To finish the thing, you need:

1. Put the first and subsequent loop together behind the walls behind the knitting needles.
2. The resulting loop is returned to the left needle and again from two make one loop.
3. So to do to the end.

Pull the edge of the product slightly when the last loop remains and, as in the past example, we will construct the thread so that the nodules can be tied up. On the right side to complete the product follows the facial loops, and with the back - involne. This is the most common method.

Close 2x2 rubber band without needle

In order for the end of the 2x2 gum to merge with the pattern itself and stretched, but at the same time not to use the needle, the following actions should be made:

1. In the drawing of the two first loops facial.
2. On the knitter in the left hand, throw the first loop and turn through it another.
3. Next to check the wrong loop and do previous steps.
4. To the last loop knit in the drawing, while on the right spit after stretching there should be only one loop.

Complete in the usual way. This can be finished and rubber 1x1.

Closing loops on the neck and sleeve

To do this, first closes the required amount of loops. On the revolving side of the rows fit according to the figure, and at the beginning of the following should be carried out on the same loop, pulling the edge. Beautiful closure of loops with knitting needles on these elements is simply necessary, as there are no sleeves and collar on some models.

Close loops in circular knitting with a hollow cord

The closure of loops with the knitting needles in this way another i-CORD is called. It is used only to complete the work on the circular product. We do the following:

1. We take auxiliary needle and recruit additional three loops. To do this, learn the front first loop, leaving on the workpice. Left needle pick up the resulting loop for the front wall from herself. Also make the remaining two loops.
2. Peel the two loops fara.
3. Third to stick together with the subsequent loop for the rear wall.
4. Return all the loops on the left needle.
5. Repeat movement to the closure of the row.
6. The remaining three loops leave on the right spice.
7. Cut off the thread, leaving about 20 cm. Insert into the needle.
8. Remove the first loop, turn a needle with a thread and turn the product.
9. Cook the needle under both ears from bottom to the loop from the other edge.
10. Return the needle into an open loop.
11. Do the same with the remaining loops and close the last one.

It may seem that such an elastic closure of loops with the knitting needles is very complex, but try, get a beautiful edge, and this method will become a loved one.

Closing the last row toothed pico

Ended knitting needles. The closing of the loops of the patterned pattern will look quite original. Make it just:

1. Patch the first loop to the needle in the right hand.
2. Next to penetrate the face loop.
3. The left needles insert the first and turn another.
4. Repeat the acting actions.
5. Insert the needle in my left hand in the loop, and right to drag the working thread to get a loop. So done twice.
6. To insert the left back into the loop under the pigs of the third row, and the right to stick the facial loop.
7. To do the actions of the 3rd point.
8. We start knit from the 2nd point.

It turns out a simple simple pattern, which will decorate the product itself. This method is not suitable if this edge is meant to sew.

Sometimes a large needle or hook is used to collect loops. You only follow the appropriate way. So, for example, if the rubber band knits knit, the closure of the loops should be elastic to not pull the product. Proper performance provides an excellent result.

Simple closure

Open loops. If the item is already over and does not require additional informance, then open loops are transferred to the pin. So the item can be stored until you knit the rest of the product. When using elements into parts, open hinges can be collected on a throwing thread to flourish freely and bend the cranked detail.

Closing of invalid loops. When using similar closing methods, the looped product looks different. The closed edge is made more depressed or free, it all depends on its location. It can be final processing or preliminary. Provide a certain number of rows with a bunk knitting until the detail is completed. Stop on the wrong side. Close the item entire next. Remove the 1st loop with an imbound right needle. In the second loop to check the wrong. Left needle capture the first loop for the front wall.

Closing on facial loops. The method is used to obtain a more stretched row.

Closing on hanging loops. This method is well suitable for closing rounded parts. It allows you to reduce the number of loops and does not tighten the closed row.

Closing crochet

Closing with three spokes. This method is suitable as a closure, after which two details can be combined into a single product with decorative decoration of seams.

Closing Pico. This is an exceptionally decorative method for processing a closed row. Often applied in children's things.

Closing in two receptions

Closing needle loops. This method is suitable for closing gum 1 * 1.

Elastic closure

Candal closure. This closing method is suitable for rounded embossed lines.

Closing the shaped lines

The knitting process is very fascinating and takes long hours of the woman's free time. Three basic principles that make the process of knitting itself are possible - this is the presence of patience in knitters, the necessary yarn and tools for the manufacture of the product.

Whatever it seemed as strange, only men were engaged in this kind of needlework, only men were engaged, and all the knitting technologies known to us were invented by them. The first ancient spokes were made of ordinary twigs. Later, women joined the process and left the privilege to engage in this skill behind them.

The range is now so great that you can choose for yourself the needles or hooks made of materials such as metal, plastic, bone, wood. It is enough to make a choice and you can begin to engage in an exciting hobby. Before starting, usually choose the product model. As a rule, knitting methods are so diverse that it is possible to create one and the same vest in completely different patterns.

Completes the process of closing a number. At the very end, the needlewoman needs to know how to close the hinges on the items of the product. This can be done both with the help of the spokes, and with the help of a knitting hook.

Close loops with spokes

Now we learn how to close the hinges with the needles in two ways.

The first way. The loops that have already been closed, in appearance resemble a pigtail, smooth and neat. You can close them tight or weakly - it depends on the quality and volume of threads. Closing the loop in this way, we can be sure that the edge of the product never stretches. You can use this method on any product or pattern. It looks like the stretching of the loops, one through the other.

We take it together with the first loop of the face viscous, clinging them for the rear walls. As a result, you will have one loop. Now we spend it with the right spokes in the opposite direction - on the left needle. Slip it together with the next loop face viscous, be sure to clinging for the rear walls. Such manipulations are done until the very end of the row. At the very end, we climb the thread, leaving the tail of 4-5 centimeters long. Now you know how to close the loops, but make sure that the canvas is not tightly tight. With this method, you can use a short knitting hook. It allows not to pull the loop strongly, and the process itself will go much faster.

The second way. The loops closed in this way are an elastic pigtail that is capable of stretching well.

It can be used for any patterns, even for the most relief.

Any details of your product can also be performed in this way.

Remove the edge loop to the right needle, and already the second knit strictly in Figure: it can be a facial or irons.

There should be two loops on the right spice. Enter the left needle in the removed loop, pull it gently and stretch through it the second.

Then check the third loop, stretching through it the second on the right spice. Do all manipulations to the end of the row. Now you are familiar with how to close the loops by the second, no less light and interesting way.

After checking the desired number of rows, you need to close the knitted fabric. Closed loops should not stand out from the overall background of knitting, be too large and rude. If the continuation of the knitting part is required, then such hinges are not closed, but remain free, they are collected for specials. Pins or throw thread to keep knitting.

Simple closure.

Pro opening a loop.

• If the item is already over and does not require additional informance, then open loops are transferred to the pin. In this form, the part can be stored until you knit the rest of the product.

• When using some elements in the details of open loops, you can collect on a throwing thread to freely turn and bend the driven part.

Closing invalion loops.

• When using similar closing methods, the looped product looks different. The closed edge is made more depressed or free, it all depends on its location. It can be final processing or preliminary.

• Provide a certain number of rows with a bunk knitting until the detail is completed. Stop on the wrong side. Close the item entire next. Remove the 1st loop of an implanable on the right spoke. In the second loop to check the wrong. Left needle capture the first loop for the front wall.

Closing on facial loops.

• This method is used to obtain a more stretched row.

About, photo.

• This method is well suitable for closing rounded parts. It allows you to reduce the number of loops and does not tighten the closed row.

Closing with crochet.

Closing with three knitting needles.

• This method is suitable as a closure, after which two details can be combined into a single product with decorative decoration of seams.

ABOUT Closing Pico.

• This is an exceptionally decorative method for processing a closed row. Often applied in children's things.

Closing in two receptions.

Closing with screaming.

• This closing method is suitable for open parts, for example, when closing a neck with various cuts, to close decorative parts.

About, photo.

• This method is suitable for closing gum 1 * 1.

Elastic closure.

• This closing method is suitable for rounded embossed lines.

Decorative closure of crochet, Photo.

Closing the shaped lines.

You learned to knit clothes to yourself and child, but do not know how to close the loops so that the related thing looks beautiful. There are many ways to close the hinge on the knitting needles, you just need to know which product is suitable for.

How to close the loops with knitting with thread on 2 together

This method of closing the loops is applied to things that, when sock, will not stretch: Plaid, scarf, shawl, bottom dress. This method is not suitable for closing the loops of things related to a rubber band, since the gum will not hold the shape, and it will look inactively and stretched.

Purp the loop in this way will be a thread that knitted.

• Two hinges are pronounced together (if the facial loops, then the pigtail from the closed loops will be visible on the front side, if the wrong hinges - on the wrong, alternately and invalid - in the middle), the front or invalid side - decide.
• On the right spit left one loop. Return it to the left knitting needles and again they check 2 together. And so, until 1 loop remains.
• We cut off the thread, leaving the end of 3-4 cm. Take the end of the thread in the loop and delay it. Now the associated thing will not break.

How to close the loops with knitting knitting

This method of closing the loops is suitable for products connected with rubber band, and it does not require a thread. A number of closed loops in the finished product looks in the middle. This way of closing the loops is carried out only on the knitting needles.

There are many different ways to fasten the loops in the product with knitting needles. Consider one of the most common and convenient ways. This closing loops by pulling each subsequent loop through the previous loop.

So, let's begin.

1. Remove one edge loop by the way you performed the edge to the product.

2. Check the next loop according to the figure. On the right spice we now have two loops.

3. Enter the left knot into the edge loop from left to right and slightly delay it.

With the right spoke, stretch the second loop through the edge loop.

The edge loop shut down from the needles. Thus, one loop remained on the knitter.

4. Check the next loop according to the figure. On the right spice we have two loops again.

5. The end of the left knitting needles enter in the first loop from left to right and pull it onto yourself. Throw the second loop through the first right spoke. Fit the first loop with the needles. Thus, on the right spice we have one loop again.

6. Points 4 and 5 repeat until you close all the loops. On the right needle there should be one last loop. Left spoke free.

7. Cut the thread, leaving the end of the thread of about 6 - 8 cm. Pull the end of the thread through the loop, tightening it tightly.

We examined in detail the method of fixing the loops by pulling the next loop through the previous one. If you have any questions or you want to discuss something, then definitely leave your comment.

You will be interested to see:

Like many other manual knitting operations, the closure of the last row can be performed in several ways.

Method 1 (main, classic). This method is universal, it is most often used. The first loop is removed from the left knitting needles on the right without tissing (thread from behind). The second loop knit in the drawing: facial loop if the loop is facial and invalid, if the wrong one. The left needle is introduced from left to right into the first loop on the right spice, pull it onto herself and echo (drop through the loop on the right spice. Knit the next loop and they will drop a loop through it with the right spoke. This method is also called the path of crossing the loop.

Method 2. The first loop knit facial to the detail corner is clear. The stored loop is translated from the right spoke to the left. The right knitting needles in the first and second loop behind the back (behind the needle), capture the end of the knitting the work thread and stretch through these two loops. Each newly formed loop is transferred to the left knitting needles and are signed together with the subsequent loop. If in the last row there are facial and invalid loops, then they are knitted according to facial or irons: if the second loop is facial, there are two loops together face; If the second loop is annenty - knit two loops of the wrong. Such a fastening of loops is better to apply in cases where the facial and invalid loops of the last row are sang.

Method 3.. Creating seam. The last row of loops closes the needle. The loop of the last row is left on the needle. Open the working thread equal to three lengths of the closed range and make it in the needle. The needle is introduced into the first loop from the front side, stretch through it the thread and remove from the needles. The second loop is passed by leaving it on the left. The needle is introduced into the third loop with an inside and stretch through it a working thread. Next, the needle is introduced into the second loop from the front side, it is removed into the fourth and so on. Make sure that the closed loops on the knitter fit to each other tightly. When the closed plot of loops becomes so big that it is inconvenient to leave on the needle, part of the loops can be removed, but quite most of the closed row need to be left on the needle so that the edge turns out to be smooth.

When closing the loops, the latter is still stretched as well as the initial, without forming pigtails. So you can finish the knitting collar or the cutting of the neck. This method is also good for closing the gum. The only disadvantage of this method is the need to leave the long end of the thread: it is not convenient in long sections.