How to make decorations with your own hands on a wedding car. Decoration on the handles of wedding machines with their own hands. Making floral composition for wedding machine with your own hands

Most of the transportation agencies for a wedding celebration offer to include the original design of the vehicle with professional florists and designers.

As a rule, this is quite expensive.

Therefore, if there is a share of fantasies and a creative approach, you can cope with your own.

1. Specify in the transport company whether it is possible to decorate a rented car, as it is sometimes forbidden to do this for the high cost of the car coverage.
2. Try to pick up cars for the wedding cortex in one color scheme so that when moving down the street, they were a harmonious line.
3. For car bright colors, it is preferable to choose calm and non-colors in the design.
4. One of the traditional design decisions is that light accessories look perfectly on a dark background and vice versa.
5. Observe the symmetry to create a single ensemble.
6. Take care of the practicality of fasteners and parts, as their disconnection may be unsafe.

If you comply with these simple rules, then not only the externally pleasant design of the car is provided, but also its reliability.

Flower compositions

Live and artificial flowers - a great option for decorating a wedding machineSo they look especially romantic and festively.
To make the machine with flowers, you will need:

• A variety of plants and compositions of them, which should be ordered in advance in the Floristics Store.
• specialized fasteners on suckers;
• multicolored dense satin ribbons;
• braid or lounge elastic;
• boutonnieres.

When making a car alive flowers, do not forget that their freshness depends on weather conditions. Therefore, ask florists to treat them with special compositions before picking out of the store.

Primarily, getting Started. First select the largest floral composition to which you plan to focus. Secure it in the middle part or diagonally the hood.

To the ribbons, the sew gum or braid so that they tightly held on the parts of the machine. Position the odd number of ribbons on one of the sides of the trunk.

Also you can tie bows on the protruding parts. Handles place boutonnieres (how to make them with their own hands), but at the same time follow the reliability of fasteners.

On the roof of the car or the radiator grille, two rings made of small living colors will be spectacularly.

Approximate cost of car decoration with flowers can vary from 4000 to 7000 thousand rubles. It depends on the variety of colors and the amount of decorative elements.

Balloons

Most Economical Wedding Design Machine - Balloons. The stationery market offers many forms, colors and high-quality materials.
If your choice fell on the balls, prepare in advance:

• garlands from balloons (helium, colored, glowing);
• thin and elastic braid;
• automotive Scotch.

Be sure to pay attention to the quality of latex from which the balls are made. The more dense it will, the better.

Choose no more than four colors, since otherwise the decor will look ridiculously and unattractive.

Garlands are attached to the roof, and on the handles of the car using the braid are attached separate balls. Additionally, you can put the ribbon on the hood or attach the heart from the fabric to the trunk.

The advantages of the car decoration by balloons are concluded in the cost, which will be no more than 3000 rubles.

Toys

Creative decoration of wedding cars - the trend of the last 10 years. Romantic Natures are ideal as accessories favorite toys.

Traditionally, the center of the composition is the porcelain dolls of the bride and groom or plush bears.
The mounting to the radiator grille is produced by wide tapes and elastic wire.

By the hood of the machine, pull the transparent grid, which will place the postcards performed in the scrapbooking technique. Write inside each postcard memorable dates or wishes to each other.

Photos

Snapshots from a personal archive will become excellent accessories when you will decorate the car. It looks original and requires minimum of preparations.
Next:

• high-quality photos of different sizes (color or black and white);
• acrylic papers for paper coating;
• medium sized brushes;
• car scotch;
• threads with large beads.

Think up in advance the location of the pictureswhich will be placed on the hood. Their form can be round, square or in the form of a heart.

Photos are glued to automotive tape over the entire perimeter. In order for their appearance to remain for a long time, you should first process each snapshot with acrylic varnish and leave until complete drying.

On the roof of the car firmly fasten the threads with large beads, thanks to which you can create a unique pattern.

Photographic design requires minimal spendingSince the most important decor elements are stored in your photo album.

Wedding tuple - a very important part of the wedding celebration, it is impossible to do without it. Not all couples can afford the rental of the same cars in a motorcade, but here archout all the cars in a single style is easier than simple!

Decorations on wedding machines Easy to make with your own hands. You will not only save, but also get original accessories, which will not be anyone else. Carefully think over the color gamut of decorations on the machine, they must harmonize with an accent wedding color Or be neutral - white-green.

Who would have thought that this expensive wedding accessory (about 2000 rubles) is so easy to make it yourself!
For rings, you will need:

1. flexible hose (rubber, corrugated - no matter) - 2 meters
2. ribbon for decoration of gold colors (foil is also suitable)
3. solid base for rings (foam, hard cardboard ...)
4. artificial flowers of the desired color
5. bells
6. scotch

Make two rings from flexible hoses - one bigger, the second is smaller. Take these tape patterns.

Make one more ring that will be used as a stand.

All rings wrap a foil or golden ribbon (However, the color of your rings can be the way you wish). Next, secure the two main rings among themselves and install them on the ring stand. Well dive with scotch all the places of connections, otherwise your composition will fall on the wind.

Firmly set the rings on a solid base that are visiting ribbons or thick threads.

The base of the composition can be issued as if: Doodle cloth or decorate with many colors or beads, show fantasy!

On every ring Tie a bell.

Decoration of cars ribbons

The ribbons are perhaps the most popular and inexpensive decoration for the wedding machine.
Ribbons are selected in color and drag the hood: or along the length of the car or the same corner. The ribbons themselves can be decorated with beads, beads, artificial or lively flowers, bows from the same ribbons or organza.

Fabric bows for cars

Gorgeous looks of huge bows behind the car!
They are very easy to make them.
Buy the fatin of white and any other combined with your wedding, tie the fabric with one big bow and attach to the car trunk. In the middle of the bow you can cold big flower Suitable shade or some rhinestones or beads.


Small bows can also be decorated handles of the machine. Little bows are very impressive, which are a miniature copy of the big (which is already on the trunk).

Toys on wedding machines

If your future family has some kind of animal associations, or you just want to put on the front bumper auto Wedding Bear - Feel free, it's fashionable!
Surprise guests to the toys made with your own hands is easy. Buy two ordinary white toys (and perhaps they even have at home) and dress them in fatin or organza. You can wear a hat made from the cardboard in 5 minutes to the toy, and on the bride toy. From the remnants of the fabric you can sew clothes for these toys, taking cloth with threads in several places.

Stickers on numbers - The simplest way to decorate a wedding car. But remember: it will look like it will look only if you use some other accessories. On the non-decorated car, the stickers will look poor and not to the place.
You can choose as standard stickers:

So the original:

Flowers for wedding cortex

Many couples decorate wedding vehicles with whole compositions from living flowers. Sure, it looks just stunning, but worth the insane money. In addition, you must be confident in freshness of flowers, otherwise you can find a brhenick on the cap to the registry office.
Flower compositions are usually attached to the roofs:


On the hood:


On the wheels:

Whatever you decide to decorate your wedding tuple, show a bit of fantasy and invest in this case a part of the soul, Then the result will exceed all the expectations!

When the newlyweds are starting to wedding cooking, the head goes around from a variety of small parts that need to be issued according to a wedding concept. In addition to bonbonnieres, boutonnieres and other trifles of the wedding decor requires such a detail as the handles of the car's car's car. Make the decoration on the handles of the wedding machines with your own hands - quite a sink problem for the bride or her girlfriends!

Variants of decorations for car handles

Accessories on the handles can be an addition to the main composition of the car jewelry or to act as an independent bright accent.

Various doors design options are possible.

Bows and Boutonniere

It can be simply bows in a classic understanding, or supplemented by applications, beads and other fittings. Speeciously look at the handles of a mini-copy of a large bow decorated on the hood or trunk. If the bow is arranged with flowers, then the boutonniere will be turned out for the car's handles.

Ribbons

The ribbon-developing tapes, selected in accordance with the main wedding style, can also be an excellent decoration. All ingenious - just! Ribbons, like bows, can be interesting to decorate either to turn them into garlands at all.

Sockets

This decoration is a combination of a bow and long ribbons outgoing from it.

Balloons

Balloons This is an eternal element in decoration of anything, however, quite fed and not very practical. Balls can burst on the frost and from any unexpected mechanical exposure. To make a truly beautiful ensemble from the balls, a highly professional approach is needed.

Pompons

Pomponon is an excellent alternative to balloons, they are as bright and volume, only do not burst and do not fly away! They can be made of paper, from threads or tissue. Paper pumps are the cheapest option, however, you need to be careful with them, as they will not be able to survive the rain.

Flower compositions

Flowers, perhaps, one of the most beautiful and trend vessels of the car decoration. On the door handles, both lonely, but bright and lush flowers and whole bouquets can be turned off. Flowers are used more often artificial. Floristic masterpieces from the living colors are worthy of higher praise, but they are short-lived and may not live to the end of wedding events, they need to have something more universal for replacement.

Suspension from various thematic items

You can hang beautiful pendants in the form of hearts, pigeons or any other wedding symbols.

Of all the varieties of jewelry options, most do not pose a special difficulty in manufacturing with their own hands, so it remains only to decide on the choice and see the appropriate master class.

Suspension for decorating door handles of a wedding car do it yourself

In order to make a pendant to decorate a car in the form of a heart, the following materials will be required:

1. the basis of "heart" of plastic, wood, foam or wire;
2. fatin 25 * 6 cm;
3. satin ribbon for winding the base and tied to the door handle, as well as a contrasting tape for the manufacture of petals;
4. rosette or another flower for decoration;
5. stamens, semi beads;
6. beads on the fishing line;
7. scissors, adhesive gun, tweezers, lighter, needle with thread.

To create a framework of the product, you need to draw heart stencil, and then cut the foundation. For the manufacture of a plastic heart, you can take, for example, a lid from the can from the mayonnaise or an old CD. Cut them under the power of ordinary scissors.

Another simple frame of creating a frame is to bend a thin metal hanger or a wire in the form of a heart and to strip it with a foam rubber (you can use conventional sponges for washing dishes).

1. The winding of the heart of the plastic ribbon should be started with two small segments of about 8 cm. On the first segment of the adhesive gun, you need to apply glue and applied it to the bottom of the heart so that one edge of the tape layer at the bottom edge of the front side of one of the halves of the frame, and the second rear. The next segment of the tape is attached similarly to the first only to another half of the frame. Then glue the tip of the long ribbon to the base of the brass to the already attached pieces, and completely wind the heart.
2. To the resulting product to glue the tip of the fishing line with the beads and crush it with it. The free end of the fishing line is also glued with a gun.
3. A piece of fatey bend along in half, assemble the bottom edge with a needle with a thread and fasten in the form of a round bow.
4. For the manufacture of petals for a flower, you need to take three small pieces of contrasting tape and, having folded each loop, pour the ends with a lighter.
5. Printed petals to rosewood, to the petals of the stamens, all this is attached to the tank of a fate.
6. The resulting composition is placed on the basis.
7. The last step is to lock on the top of the heart the ribbon to tie the suspension.

In general, the framework of the framework depends only on the fancy of the master. If we arm a lot of different ribbons, artificial colors, petals, you can make a heart, for example, in the form of a wreath.

Suspension Making Video Lessons:

Tissue bows do it yourself

For the manufacture of a lush bow, you need to take a rectangular piece of fate or other floral material (organza, felt, mesh, etc.) with a size of 70 * 25 cm, assemble it with harmonica and tied in the middle of a rubber band. Bow ready! Now it can be decorating any elements. If you take two such bow, and between them fix a few long ribbons, then the socket will be.

Bates from ribbons do it yourself

Beautiful classic bow can be made of satin ribbons literally on the fingers! To do this, the end of the tape is placed on palm and clamping between large and index fingers. The free end will be burned around the mother's motherhood and unnamed from the outside, then around the middle and indexing with the inner. Next, the coil returns to the edge of the palm, again bypassing both pairs of fingers with opposite first turns of the sides and is passed between the nameless and middle fingers. From this position, it is once again necessary to wrap a pair of maiden and the nameless and the working end of the tape twice wrap and fix the nodule of the machine already formed on the fingers of the workpiece of the future bow. It remains only to remove the resulting product and accurately straighten it.

Video Booth Manufacturing Lessons:

Pompons of paper with their own hands

Paper pumps can be made from corrugated, napkins, sewing. For one pump, you will need about 8 sheets of paper 25 * 50 cm stacked. Sheets need to be folded harmonic and tear it in the center. If desired, the edge can be rounded with scissors. Then you need to carefully disconnect all the leaves from each other and straighten them.

Video lessons for making paper pumps:

Probably noticeable that our wedding is full of various traditions. One of the most popular and loving such traditions is the presence of a wedding car. As soon as he heard the word "wedding", a picture appears in the head with the accompaniment of a wedding cortex.

For a long time and up to now

This custom came to us since the time of Russia, when future spouses were taken in a harness, which was decorated with different ribbons and bubbers. According to the legend, the carriage of the bride and the bride was driving around the circumferential road, and the Bubrenians scared all the extremes, which tormented to break the love of two hearts.

People who saw the "wedding train" wished the culprits of the celebration of happiness and well-being.

We now see the continuation of this tradition, only instead of the harness with horses - a wedding car. And the decorations for the wedding machine are used simply for beauty, and not to scare up evil spirits.

The car for the wedding also has a bouquet

To beautifully decorate the car you need to take into account many different factors (brand of car, its color, brand and model, "age", wedding style).

Flower compositions are now one of the mandatory decor elements. Live flowers can be placed on the radiator grille. But artificial in this case is more practical. They longer hold out and less susceptible to the speed on which the car moves.

Flower garlands are very popular, which came to us from America and England. Their essence is that the floral pumps are attached so that they hang out behind (before it was banks that were scared as evil spirits). And most importantly, they can be made with their own hands.

The main thing in this matter is not to overdo it and know one important secret: the colors of our decorations and cars should be harmonized. For example, if the car is black, then it will look elegantly white roses.

To not overdo it with flowers, you can use multi-colored ribbons. Let's call them a win-win duet.

Flower bouquets can serve as an entrance to the hood, and they can decorate the handles of the machine.

At the expense of 3 taking off!

Balloons were very loved among modern newlyweds. Decoration for a wedding machine with balls looks idle and cute. Thanks to them, it seems as if you are flying on the road, not going.

You can vary the design of the car in different ways:

Combining different colors

Creating numerical figures

Hanging balls just on satin ribbons

It will be nice to look with bow balls in the same color scheme.

The main thing is to remember that such a decoration is very short-lived, and after a couple of hours a trip can just lose your beauty.

Wedding Rings do it yourself

This is one of the most symbolic options for the decoration, which shows the creation of a new family and an increase in the love of newlyweds. Fasten the rings can be on the roof of the car, and decorated with a bouquet of flowers. You can buy them in the store, or make rings with your own hands.

For this we will need:

• Flexible water tubes long almost 2 meters
• Three small batteries
• Golden ribbon (it can be reached in any floral store)
• Two rules (preferably wooden)
• Flowers
• Scotch
• Adhesive Pistol
• Scissors

1. Cut the water pipe into three parts of different sizes. The largest part will be the basis on which our two rings will stand. Attention! The one that the most, in diameter should be larger and two lines.

2. Next to each part insert the finger battery so that it is sticking to half. And connect with that part of the tube where there are no batteries. If you are not sure about the reliability of this design, you will reinforce it with a tape or glue.

3. Watch out our basics for rings and two rules prepared tape. Little and middle Ring attach each other. So glue the line and the biggest ring. And we connect between your whole design.

4. And the last. Decorating the rings with flowers, or any other elements of the decor.

In addition to standard rings, you should try to make a heart with your own hands. The manufacture of such jewelry brings a lot of pleasure! So try.

Fabric decorations for a wedding machine

Why are such decorations so popular? They give aesthetics and Beauty your car. In addition, it is always practical and easily come up with new options with them in order to beautifully decorate the car. Such design may be modest and minimalistic, or completely the opposite - solemn.

The most popular fabric is fatin. Fatina Machine Decoration is one of the most beautiful options as it gives the car light and airiness. Slightly playing with materials it is possible to make a fabric and bouquet model of the news of the bride. And the hat can stand next to the headdress of the groom.

Or spend the tissue strips along the car, as if the rays of the sun.

Standard, or Unusual Decorations

In addition to the above handling methods, there are others.

On the hood of the machine you can put soft toys. Bears on the car - a pretty idea for decoration itself.

Are you those who love jokes? Then attach lips to the machine!

Cook accessories for cars and green decorations, and make out the machine as it tells you your fantasy!

And several master classes to help you:

Wedding is a special day in the lives of newlyweds. And, of course, they want everything to be perfect. This applies to the appearance of their car. To do this, it is necessary to come up with all attentiveness. Those who want to get rid of themselves from additional troubles simply take the rented attributes necessary for design. But if you want your wedding car to be distinguished from the rest, it is best to make a decoration for the car with your own hands. After all, this is a good way to save.

Decoration of a wedding car

To give the car a solemn view, it can be decorate with a wide variety of materials. Basically, preference is given to satin ribbons that may have a certain color, width and length. Of these, you can make gorgeous bows for the car.

Another popular wedding vehicle decoration option is flowers. Live plants use for this purpose - not a very reasonable solution, as they quickly become called. It is best to buy artificial.

If you firmly decided to make wedding accessories on the car with your own hands, then you will have to prepare a certain list of necessary materials. Among them you will need:

Even if in your house will not be some tools or materials, you can always purchase them at any economic store.

Cover car decoration

Preparation of a wedding car To the upcoming celebration begins with the design of the hood. If you want the car to look luxuriously, then you need accuracy to follow the next algorithm:

Registration of the door

You should not have any problems with the decoration of the car door. This can be done in two ways:

Wedding rings on the roof

A fairly common accessory, which decorate the wedding car, are big shiny rings. Beautifully arrange the car is also very simple. In order for you to quickly cope with this task, we give a detailed instruction:

Interior

Each couple of newlyweds wants a festive atmosphere at the wedding. This can be achieved among this, due to the proper design of the car. It is necessary to pay attention not only to its appearance, but also internal content. First of all, it is worth thinking about it if you are planning to shoot a bride and groom inside the car.

To begin with, you can make a steering wheel. A ribbon will be excellent for himBut do not forget about the color that must match the wedding style. The glass can be decorated with glowing garlands, and if desired, they can be supplemented with stickers or photographs of young.

Mirrors will look great with a figure of swans, hearts or love couples. If you have sufficient financial capabilities, then for such a solemn event, instead of ordinary can be put on covers that more correspond to the total color range of the holiday.

The ideas of the design of a wedding cortex

If during the celebration you are going to organize a machine system, then you will have to make each of the cars participating in it. But first find out how many people will come to the wedding in its transport. So you can at least approximate how much decor you need. You can proceed easier and contact guests with a request to make their own cars. Although in this case it is impossible to be sure that you can withstand the overall stylistry of the celebration. Therefore, it is best to make simple jewelry and distribute them to guests in the morning.

Your main task is to ensure that the newlyweds car be the most beautiful and stand out among the rest of the transport. At the beginning of the column it is recommended to put light or close to the shade of the car, and the dark and bright models should completing it.

Decorating with balloons

If you do not want to spend extra money for the purchase of expensive jewelry, you can stay at the cheapest decor - balloons. Such an option to decorate the car is present almost at each wedding and many even managed to get bored, but despite this, he still continues to use.

If you can't come up with nothing superordinary, you can simply inflate the bundles of balloons and fasten them on the roof, bumper or radiator grille. But know the measure - the balls should not be too much. Also, do not forget that balls tied to these places can be taken away at any time.

Also from the balls you can make a variety of designs. Hearts, bows and flowers will be especially unusually looking. If you have a fantasy work well, you can come up with something more original. The design created by your own needs to be tied to a dense twine and pull between two support points on the trunk, roof or hood.

Table design

In principle, for the decoration of the car, you can use any material you like, but we still recommend to stop the choice on proven solutions that are organza and fatin. These are light and transparent fabrics that perfectly hold the shape.

Arrange cars You can in different ways. One of them involves pulling the fabric on the hood in the form of neat drapery, followed by fastening from the inside using a liner.

It is possible to give an unusual type of machine, decoring it with garlands made from fabric. For this decoration, 200 × 20 cm strips are cut. Next, the fabric is collected on a needle with a thread every 20 cm, and flowers or other decorations are sewn into the places of generated bends.

Another original version of the wedding decoration on the car you can make yourself - pumps. Cut the fatin or organz to stripes 70 cm Long and 20 cm wide. Then, along the center, place them with a thread and pull. Such pumps can be used as independent elements or additions to an existing main decor.

Decorating the car with ribbons

You can decorate the car using satin, kapron or paper tapes. The classic composition provides for the use of three different colors, which make up the hood on one side. The combination of the following shades will be excellent:

• white blue red;
• blue, blue, pink;
• yellow, red, blue;
• red, pink, crimson;
• three shades of pink or any other color.

To make it easier to calculate how many centimeters will be required for the tape, do the following. Measure the length of the hood and multiply by 1.5. At the finished ribbon, one end must be twice and sew a piece of lounge gum. After that, the billet can be mounted on the hood. At the end, the free ends of ribbons and gums are sewn to each other.

Another option is possible: you need to perform the same actions, but without using the needle. In this case, you will need to tie with each other ends of gum and tape.

Similar decoration will also give the car a solemn view. Additionally, it can be decorated with robes and bows that will look great on the lid of the trunk, handles and mirrors.

Use flowers

Remember that for the design of wedding transport it is best to use artificial flowers. Live plants will retain their attractive appearance very long and quickly covered, not withstanding frost or severe heat. Before placing vegetation, we advise you to collect a beautifully decorated composition from it.

For greater expressiveness of the plant in the area of \u200b\u200bthe stems can be tied with a floral ribbon. Such a bouquet will perfectly look at the hood or roof, where it can be fixed with a lubrican rubber or tape.

More reliable fastening option It is a floristic sponge with suckers, in which flowers and leaves stick through the entire area. And be sure that such a design will remain in primevaria all day before the end of the celebration. Magnets can also be used as a fastening of wedding bouquets for the car, but at first they should be wrapped with a soft cloth in order to avoid the appearance of scratches on the paint and varnish.

The car is a mandatory attribute of any wedding and must be decorated in a certain way. If you want this day everything is perfect, we advise you to think in advance about the decoration for road vehicles. Design options may be mass. The simplest solution is to rent already ready-made wedding accessories for the car.

But if you want the holiday to remember for a long time, then spend a little time and make decorations for the machine yourself. Showing a little fantasy, you will probably create your own hands the original decor for the car, which will not only remain in the memory of young and guests, but also make passersby pay attention to the wedding transport.