Bright design of bottles and glasses for a wedding. Wedding champagne on an arch stand DIY champagne clothes for a wedding

At the stage of wedding preparation, future newlyweds strive to think over all the nuances of the future ceremony. The bride chooses a beautiful dress for herself, experiments with makeup, hair and manicure, the groom buys a festive suit and worries about the wedding car and the banquet hall. Details play a big role. Decorating a festive table is also a responsible occupation. If you approach this issue correctly, your wedding ceremony and the subsequent banquet will be remembered by all guests without exception.

For example, a wedding bottle of champagne, decorated with your own hands in some unusual way, can become an original idea. Consider the main options for creating such a decor.

Bottles in the image of the bride and groom

This is a very interesting new trend. The bottles are sewn into suits reminiscent of the outfits of the bride and groom. To make interesting decorative elements for the “bride's” dress with your own hands, you must:

• sew a satin skirt, make a belt with an elastic band;
• decorate the skirt with all kinds of lace, ribbons, beads or rhinestones;
• do not forget about the veil, it can be sewn from chiffon.

The "groom" needs to prepare a tailcoat from narrow satin ribbons of black and white colors.

• The tapes are glued in front with an overlapping cross.
• First, you need to stick a few white ribbons on top, which will imitate a shirt.
• Further, to the bottom, the bottle is pasted over with black tapes.
• At the end, rhinestones in the form of buttons are glued.
• You can complement the groom's outfit with an original hat made of cardboard and pasted over with fabric.

Decoupage - This is an unusual technique for creating decor, when an image is transferred to a bottle.

Note! It can be quite interesting to get a decoration using a regular wedding card.

To create this festive bottle you will need:

• champagne,
• festive wedding card with a beautiful picture. for example, hearts, pigeons, etc.,
• acrylic varnish and paint,
• foam sponge.

Manufacturing technique:

1. First you need to remove the label from the bottle, for this you need to wet it with water, preferably cold, then it will come off quite easily. However, if you run into the problem of a label that sticks too well, it can be removed with solvent. But in this case, after getting rid of the label, the bottle must be thoroughly rinsed, otherwise the application of acrylic paint will be impossible.
2. If you wish, you can degrease the bottle with a glass cleaner or alcohol.
3. Next, you need to paint the bottle with acrylic white paint.
4. The postcard needs to be covered with acrylic varnish in two layers and allowed to dry well.
5. Now you need to carefully remove the top layer from the dried postcard. It should come off easily enough without damaging the drawing.
6. Now you need to cut out the drawing on the postcard.
7. Spread glue on the bottle and glue the details of the drawing on it. Try to take your time and do everything as neatly as possible, smooth the edges and glue the postcard well.
8. Choose a paint that you think will blend in perfectly with the rest of the pattern, dilute it and apply to the empty parts of the bottle that are not affected by the pattern.
9. Make a darker outline for all the details in the image.
10. Dip a foam sponge in a lighter paint and make a haze, smoothing the borders.
11. You can make a silver streak with a paintbrush and paint.

Decoupage involves gluing various elements to the bottle: beads, rhinestones, artificial flowers, decorative clay stucco moldings, etc. The process of creating a decor is completed by coating the product with varnish. The pattern and color of the jewelry is limited only by the imagination of the master. Acrylic paints don't have to be white. You can use any colors and shades. You can complete the creation of jewelry by sticking various ribbons and lace, jewelry, you can even lay out small pictures of beads or rhinestones.

Champagne decoration with ribbons

Bottles decorated with multi-colored satin ribbons look unusual.

Note! Such bottle decoration is quite simple to make.

• We measure out the first layer of tape by attaching it to the neck of the bottle. Cut it off and glue it to the base of the bottle with an overlapping cross.
• Thus, we glue the bottle to the middle. It is necessary to ensure that the tape is always glued with the right side with an overlap, then it will look neat and beautiful.
• Next, you need to glue the bottle around with tapes. After that, you can decorate the bottle with a beautiful lace fabric and attach beads, bows, feathers and other decorations of your choice to it.

Decorating with photographs and engraving

Decorating a bottle of champagne with photographs of the bride and groom has long been used by newlyweds. For this, photographs of the newlyweds of a certain size in frames in the shape of a heart, equipped with original wedding drawings, are ordered in the darkroom. These images are applied to special adhesive paper, which is then easily glued to the bottle.

Engraving a wedding bottle is a rather rare and expensive way of decorating, but it allows you to make the bottle original and memorable. The creation of the drawing and inscriptions is entrusted to specialist engravers, who, at your request, apply all the necessary symbols to the bottle.

The wedding decoration of a bottle is an interesting creative process that gives you the opportunity to show your imagination and talent as a decorator. Putting your soul into this activity, you can get a magical result that will be remembered by all guests of your celebration, will make the ceremony and the subsequent banquet original. You will remember the wonderful moments of your wedding for a long time and you will be proud that you seriously and responsibly approached its preparation, without missing a single small detail.

Video

Watch a master class on decorating wedding champagne bottles with ribbons and lace.

DIY champagne clothes for a wedding are a popular and relevant decor. Bottles are usually dressed in suits for the bride and groom. All kinds of materials and methods of their processing can be used for decoration: lace, organza, velvet, satin, ribbons, tulle. This creative design of champagne attracts the attention of those invited to the wedding ceremony.

How to make fabric champagne clothes

Sewing real clothes for champagne using fabric with your own hands is an easy task that an inexperienced craftswoman can handle. To do this, you should pick up scraps of fabric, decor items that you like. The color of the groom's suit can be not only black, but also burgundy, dark blue, purple. The bride is best done in traditional colors: white, pale pink, sky blue, gold and other pastel colors.

Necessary materials

To make your own champagne clothes for a wedding, you will need the following materials:

• 0.5 m of satin and tulle for the bride;
• beads, beads;
• satin ribbon 2.5 cm wide, 1 m long;
• scissors, threads, pins, needles;
• candle;
• ruler;
• iron;
• A4 sheet;
• black satin 29x20 cm;
• black satin ribbon 2.5 cm wide and 0.5 m long;
• burgundy tape 1.2 cm wide, 0.5 m long;
• two white ribbons: one 5 cm wide, 0.3 m long, the other 1.2 cm wide, 0.3 m long.

Stages of creation

• First, let's tackle the champagne clothes that symbolize the bride. We cut out a piece of A4 satin fabric with our own hands, singe the edges with a candle.
  
• We measure the girth of the bottle, measure it on the satin rectangle, draw a line. We fold the fabric in half, sew.
• We put champagne in the resulting case, mark the side seams with pins, where the bottle narrows, sew, cut off the excess, singe the edges.
  
• We fold the top edge, sew with beads or beads.
• Draw a semicircle for the skirt, the hem length is 16 cm, and the inner semicircle is 26 cm, cut out the pattern.
  
• We apply the image of the contours of the skirt to the fabric, outline it, giving allowances.
• Cut out the skirt, singe the edges with a candle. Sew on the inner circle.
  
• For the train, cut out a pattern on paper with the dimensions shown in the photo.
• Cut out the pattern of the train on the fabric, giving allowances for the seams, singe the edges with a candle. We attach a train to the dress, make a fold.
  
• We cut out from the fabric a rectangle 2 A4 sheets long and 4 cm wider than the sheet.
• We connect the train and the cut out rectangle of fabric from the seamy side with a seam.
  
• We distribute the rectangle along the length and width of the train, stitch it, leaving a small area to turn out the fabric.
  
• Gather the upper part to the size of the train, forming folds, and stitching it.
  
• For the petticoat, cut out 3 rectangles 7 cm wide, 40 cm long. The first rectangle will serve as the top: we connect its edges on the bottle so that it fits snugly. Sew the remaining rectangles, make ruffles from the resulting strip. We attach it to the top, iron it.
• We connect the petticoat to the base of the dress.
  
• We put on a train and a skirt from above, connect with a seam.
• We make a belt and a bow from the braid.
  
• Cut out a square with a side of 50 cm from tulle, fold it as shown in the photo and fix it.
• We sew tulle to an elastic band, decorate with beads, flowers. We put the veil on the head of the bottle.
  
• To create clothes for champagne, symbolizing the groom, we make a case measuring 29x29 cm with our own hands.
• For a shirt, we wrap a wide white braid along the neck, stitch it from below.
  
• We take off the resulting shirt, turn it inside out, put on a narrower braid, sew it on.
• We turn it out on the front, iron the resulting collar with an iron.
  
• We put the burgundy braid on the neck of the champagne, like a tie.
• We put on a black cover on top, retreat 0.5 cm from the edge up, repeat the contour with soap along the entire length.
  
• Cut off the excess, singe the edges. Sew on the collar from the seamy side with black tape, iron it.
  
• We put on a jacket, sew it to the shirt under the collar.
• Sew on beads instead of buttons to the jacket.
  

Organza and velvet champagne clothes

Guided by the master class below, you can decorate champagne for a wedding with your own hands in an original way. The magnificent clothes of the bride and groom, made with velvet and organza, will certainly draw the attention of all guests to the bottles. Such work is within the power of any girl who can hold a needle in her hands. Do-it-yourself champagne decor will not take you a lot of time.

Necessary materials

You will need the following materials to create your own champagne clothes:

• organza for a skirt 30x80 cm;
• white satin;
• velvet black paper;
• velvet black fabric 30x40 cm;
• lace 1.8 m;
• adhesive tape for edge processing;
• instant glue;
• organza for a veil;
• flesh-colored ribbon 40 cm;
• white satin ribbon 2 cm wide, 0.5 m long;
• white narrow tape 1m long;
• rhinestones, beads, artificial flowers for decoration;
• wide organza ribbon for a bow.

Pattern and stages of creation

• In those places of champagne for a wedding, where there will be a light fabric, wrap it with white mounting tape, paper, cardboard, or cover it with paint, tear off the label. On the bottle, symbolizing the groom, we lay the mounting tape along the bottom of the shirt and the collar.
  
• For the bride's corset, wrap the front part of the champagne for the wedding with a piece of white satin 3-5 cm wide.
• We put a body braid around the neck, cross the ends and hide them.
  
• To fix the corset on champagne for a wedding, we put double-sided adhesive tape on the inside of it.
• Fold the fabric for the skirt so that the lower part is one third larger than the upper one.
  
• Sew lace 2.5 cm wide on the upper flounce.
• Sew narrow lace on the hem.
  
• We put a ribbon between the flounces, tighten the skirt at the place of the bottle where the waist is supposed to be.
• We distribute the folds beautifully, sew the skirt to the corset. We sweep the edges at the back.
  
• We decorate the corset with lace, sew a bow on the back.
  
• For the cape, cut off a piece of fabric 5x28 cm, die the edges.
  
• We intercept with a narrow braid in the middle, connect with a ring.
  
• We put it on the neck, fix it with glue at the back.
• Cut off a piece of organza for a veil 30 cm long and 25 cm wide.
  
• We tie a braid to the head, or a low bead, attach the veil. The bride's clothes are ready.
• To make clothes for champagne for the groom with our own hands, wrap the bottle with paper, then you need to draw the outlines of the suit.
  
• To make trousers we sew black velvet 8 cm wide, 27 cm long, add a seam allowance.
• We hem the bottom edge, turn it inside out, put on trousers for champagne. We lay a white braid along the upper edge, sew it to the trousers.
  
• We put a small piece of white cloth on the front of the neck and fix it with adhesive tape.
• We attach a bodily tape around the neck. Below we wrap the neck of the champagne with a satin white ribbon, we hide the ends at the back. For the collar, put on a 20 cm white tape, cross it on the chest, fix the ends with glue.
  
• We cut out a frock coat from velvet according to the pattern, connect its parts, sew a white ribbon in front.
  
• At the top of the coat, on the wrong side, we make four small darts so that the clothes fit well.
• Trying on a tailcoat.
• We cut out a velvet collar, glue a white tape along its edges. Glue the collar to the champagne.
  
• We make a bow tie from a ribbon, a black cylinder from velvet paper and two buttons. We put champagne in ready-made clothes.
  

Making champagne and glasses for a wedding with your own hands

Today, no one can say where the tradition came from, to put on the table in front of the bride and groom decorated bottles of champagne or, as they are popularly called, bulls. They remain unoccupied throughout the entire celebration, since it is customary to drink them only on the wedding anniversary or in honor of the birth of the first child.

Since these bottles are in a conspicuous place, and then kept for quite a long time in the house of the newlyweds, special attention is paid to their design. That is why those who like to create various crafts are happy to try their hand and do not spare imagination for decorating them.

If you are also attracted to decorating bottles, then check out some interesting options.

Decoupage decoration

To decorate a bottle for a wedding in this way, you will need:

• acrylic paints, including necessarily white;
• contour and wide brushes;
• acrylic lacquer;
• PVA glue;
• sponge;
• pieces of skin and tissue;
• wedding postcard, with a picture on a white background;
• gold or silver paint;
• needle;
• various decorations (beads, ribbons, artificial flowers).

The order of execution of the option in the decoupage style

Decorating a bottle for a wedding should start with preparation. To do this, remove traces of glue and labels from the glass surface and degrease the surface with acetone and alcohol. Next, go directly to the design of the bottle. For this:

• applied to white paint using a piece of sponge;
• cover the surface of the postcard with 2 layers of varnish;
• waiting for it to dry out (do not be afraid of the bending corners);
• pry off the top layer with a needle and separate it from the cardboard;
• a fragment with a pattern is cut off from the blank (an image of flowers, newlyweds, rings, doves, etc.);
• grease the surface of the bottle with glue;
• apply a drawing to it;
• smooth;
• allow to dry;
• with a wide brush, light pink or pale blue paint is applied along the contour, shading to mask the cuts;
• wait until it dries up;
• with a thin brush, they draw hearts, flowers, etc. on the contour;
• decorate by gluing beads and other small decorative elements;
• paint the bottles with silver or gold veins;
• if you wish, stick it on

Decorating champagne bottles for a wedding: master class

We bring to your attention step-by-step instructions for decorating these wedding accessories in the form of a bride and groom.

For work you will need:

• two bottles of champagne;
• organza ribbon;
• 11-12 m of bias tape in white and black colors;
• glue "Titan";
• Double-sided tape;
• decorations.

"Groom" bottle making workshop

You need to create such a bottle decoration for a wedding in the following order:

After the "tuxedo" and "shirt" are ready, continue decorating the bottle for the wedding with accessories. For this:

• a circle with a diameter of 7 cm is cut out of cardboard;
• take half of a plastic container of a kinder egg;
• draw and cut a circle in the middle of the cardboard part;
• half of the container is inserted into the hole;
• pasted over with a black inlay;
• putting a hat on a bottle;
• a piece of 8 cm long is cut from the black inlay;
• fold it so that the ends meet in the center, and a bow-tie is obtained;
• stick it over the white collar.

Bride design

Such decoration of bottles for a wedding, the master class of which is presented below, is made in the same way as for decorating the "Groom".

Operating procedure:

Option in the style of "Provence"

For such a very simple decoration on champagne bottles for a wedding (see photo below), you will need burlap, handmade lace and yarn. It should be said right away that bottles decorated in this way are only suitable for a wedding in the appropriate style.

Operating procedure:

• lace is sewn onto a piece of burlap 10-15 cm wide on both sides;
• stick it on the bottle so that one end goes to the other by 1.5-2 cm;
• wrap the neck with a piece of lace, measure and cut;
• glued so that a collar is obtained;
• glue a bead on the burlap;
• tied over the lace on the neck with yarn and tied with a bow.

Option with ribbons: what you need

You can make a bottle decoration for a wedding with your own hands from a variety of materials. For example, ribbons are a good choice. For him you will need:

• 2 bottles of champagne;
• white paint in an aerosol can;
• satin ribbons (2 m);
• one-sided tape;
• beads;
• insulating tape;
• glass contour;
• pastel;
• stationery glue;
• polymer clay flowers;
• cyanopane glue;
• double sided tape.

Option with ribbons: working order

Decorating bottles for a wedding (see photo below) with ribbons looks like this:

• remove stickers from bottles;
• degrease the surface with a window cleaner;
• dried;
• paper decorations are glued to the glass (you can cut an ornament from scotch tape;
• paint a bottle from a spray can with white paint in 3 layers (after each they wait until it dries up);
• carefully remove pieces of paper or tape;
• flowers are glued to the bottle;
• paint it with pastels and an outline;
• tie a satin ribbon around the bottle, putting double-sided tape so that it does not move;
• the ends are tied with a knot and a bow.

Option with pouches

If you have the simplest sewing skills, then you can make a bottle decoration for a wedding, the photo of which is presented below.

You will need a nice lace and a satin ribbon. You will also need a beautiful white fabric with glitter, from which you need to sew two bags, in which you can put a bottle of champagne. Their upper edge must be trimmed with lace. Having put the bottles in bags, you should tie them on top with a white satin ribbon and decorate with a bow.

Composition "Heart"

Since it is customary to put two bottles on in front of the newlyweds, many craftsmen offer decor according to the principle of folding halves. For example, you can do it yourself with a heart. For this:

• peel off labels from bottles and remove traces of glue;
• degrease their surfaces;
• paint in 3 layers in white from an aerosol can (wait 2-3 hours between painting);
• with a well-sharpened pencil, using a stencil, draw half a heart on the surface of the bottle;
• take small flowers from thermoplastic and white beads for pearls;
• stick them along the contour on the bottle;
• leave to dry;
• the same is repeated with the second bottle, using the second half of the heart-shaped stencil;
• decorate it by sticking a mirror pattern;
• decorate both bottles with painting;
• if desired, white ribbons are tied at the necks and glued to the knots along a bead.

Goblets

Together with wedding bottles, it is customary to decorate two more indispensable accessories. These are the glasses from which the newlyweds will drink. Their design should be in harmony with the decor of the bulls. For example, if the bottles are decorated in the form of a bride and groom, using a black and white inlay, then the glasses should also be decorated using this material.

Now you know what kind of decoration of champagne bottles for a wedding with your own hands you can make, with minimal knowledge in the art of decoration, and you can please your newlywed friends with a beautiful and memorable gift.

The main thing is to show your imagination and do everything very carefully. Indeed, only in this case, the bottles will look presentable, and they can be displayed in the most conspicuous place of the wedding table.

Without exaggeration, it can be argued that the brightest event in life is a wedding. Much of the decor on which an unforgettable festive atmosphere depends can be created with your own hands, including the original design of bottles for a wedding. Everyone wants every decoration of the banquet to be creative and delightful. And each element was decorated very carefully, starting with the arch for the wedding ceremony and ending with glasses of the bride and groom.

From ordinary bottles of champagne, you can make a real exclusive, which will be the center of attention at your wedding.

A young couple will have to devote part of the personal time that they could devote to each other to the choice of wedding paraphernalia, but these are pleasant chores. However, their loved ones can take on the responsibility for the design of attributes, including what will stand in the most conspicuous place - two bottles of champagne in the form of a wedding couple.

There are many interesting wedding traditions, among which there are two untouched bottles of sparkling drink, most often champagne, with the exception of completely non-alcoholic ceremonies.

This indispensable attribute of the wedding ceremony is decorated and sealed in a special way so that they remain intact.

Decoration with satin ribbons or paper details

Why aren't they touched? According to tradition, the newlyweds should take them with them from the wedding table.

You will have to drink the contents of these, in fact, holiday souvenirs much later:

• for a wedding anniversary;
• after the birth of the first child, when he and the young mother will be brought from the hospital.

Important! There are no uniform requirements on how best to decorate bottles for a wedding, it depends on the wishes of the newlyweds and the taste of those who are engaged in their design.

Champagne decor with lace, tulle or other beautiful fabric

A lot of options have been proposed on how to decorate this table souvenir. There are many master classes on decorating wedding bottles, but not every technique is available to beginners. Among the most popular offers.

Bottle decor in original technique (decoupage, scrapbooking and others)

The main idea of ​​decorating a pair of bottles is to give them the symbolism of the bride and groom - He and She with the attributes of a wedding dress. If both the bride and groom have experience in DIY, you can prepare a surprise for each other. But it is better to agree on what color and material will be. Then, on the day of the wedding, everyone will give their soul mate an original souvenir.

What materials are traditionally decorated with a wedding bottle

It is advisable to decorate both bottles using the same technique so that a pair combination can be traced. For example, if it's just white spray painting, you can purchase one larger bottle and decorate with a homemade hat and a bow tie. Then a smaller bottle can have a white veil or a skirt with 2-3 rows of flounces. They can be assembled on an elastic band or sewn from a beautiful and light white fabric, collecting with a drawstring:

• tulle;
• atlas;
• silk;
• organza;
• tulle;
• veil;
• guipure;
• lace;
• embossed tape.

The paint is applied in several thin layers until the bottle is perfectly white, without gaps

More attention is paid to the design of the "female" bottle, the "male" half of the table decoration looks more restrained. Modest decor can be sophisticated if every detail is considered. You can spy on other people's ideas or make from scrap material something that no one else had, when there is such a desire.

Advice. Do not take the design of wedding glasses and bottles lightly. These attributes will be in plain sight, so there is another opportunity to surprise your guests.

A hat for a bride's bottle can be made from colored cardboard

If the wedding is non-alcoholic, you can arrange any fizzy drink in a beautiful bottle. Some people want to arrange a bottle of cognac or other strong drink. The basis of the decoration is the same - wedding theme:

• he and she;
• rings;
• hearts;
• Colour;
• elements of the bride's attire.

You can use beads and pebbles with a flat base (for gluing), sequins and beads, small artificial flowers and jewelry fragments.

Decorating bottles with polymer clay flowers

If you are ready to do the work yourself, do not put this part of the wedding props on the back burner. It may take longer than anticipated. To choose something creative and non-standard, when you do not have your own ideas, look at the topic of decorating wedding bottles with your own hands, master classes and step-by-step explanations.

Of course, such a wedding attribute can be bought ready-made or offered to the master to be made to order. This will surprise no one today, but where is the guarantee that your guests did not celebrate another wedding at a table with exactly the same decor? It can get awkward when asked whose champagne? Therefore, it is better to choose something original so that no one from your environment has this.

Wedding stickers are one of the easiest bottle decorating options

An order for a master will cost 2-3 times more, but it's not even a matter of saving, although everything can be done from scrap materials. No one can put so much warmth into the decoration of your wedding as the bride and groom themselves or their loved ones.

Important! You can vary the color of the decor of wedding bottles with your own hands, but it should not bring disharmony into the overall design of the festive feast. If this is a wedding in lilac, gold or turquoise colors, then it is better to complement the white bottle of champagne with decor in the agreed range.

Bottle decor with white satin ribbon

Artificial roses can be added to bottles decorated using decoupage technique

An original piece of jewelry can be made in duplicate - sold to guests from an impromptu auction. Or offer a souvenir as a prize in the most beautiful or original contests.

Choosing a bottle design by the type of bride and groom

The so-called "wedding bottles" with champagne or other drink are table decorations that are gaining popularity. They are also accompanied by glasses of the bride and groom. And even if the newlyweds are not at the table, you can immediately see where their place is, since the design itself shows the honorable place of the heroes of the occasion.

1. The simplest way is to spray champagne. To do this, remove the sticker (leave the foil), wash off the remnants of the glue and work on a dry surface. It is easy to stain the environment with paint from a spray gun, therefore it is better to work in street conditions in calm weather, spreading newspapers under the souvenir. Over the painted surface, it will be possible to tie the bottles with ribbons with bows, stick the fittings.

   

   You will need white acrylic paint, multi-colored satin ribbons, cardboard and decorative elements - beads, bows, lace or textile flowers

2. For lovers of needlework, it will be easy to sew clothes with female and male attributes. This is easy to do, but do not rush to wrap the glass container with cloth. Better to sew the veil, skirt and jacket separately, and then wrap or champagne and carefully secure with glue (liquid nails, glue gun, and superglue leaves stains). At the same time, it is not worth giving the container personality traits (lips, eyes), only gender difference in the form of clothes.

   

   “Clothes” for champagne in the style of the bride and groom

3. Light decor in the form of ribbons and hats is the simplest option. For a bride, making a veil from a translucent or lace fabric is not difficult. It is also recommended to wrap the base of the bottle with a white guipure or lace strip. Summer black or blue satin - for "Him", you can build a butterfly on the neck. Tie both bottles at the bottom with wide golden ribbons, as a symbol of wedding rings. "He" can make a hat based on a kinder surprise egg case or a small lid.

   

   Elegant champagne bottles for the newlyweds' table

4. Volumetric decor - coins, pebbles, artificial flower petals and other wedding-themed decorations. Polymer clay roses and flowers take time and perseverance, but it's worth it! It is better if the stucco decoration is of the same color as the base - white or golden.

   

   Wedding champagne with volumetric decor

5. The French style of decorating or decoupage is a unique technique with special napkins. Postcards or photos with thematic drawings are recommended as inserts, from which the top layer is removed when soaked. Much can be found in the All for Needlework stores.

   

   Champagne decoupage in gold color

6. You can buy stickers and decor on a wedding theme or make your own appliqués on any glue base for needlework.

   

   You can stick photos of the newlywed and the inscriptions with the date of the wedding

Important! Inaccuracies in work, glue stains, awkward scissors notches occur. If it is possible to redo it, it is better not to expose your mistakes to the public. Small errors can be hidden with rhinestones, small artificial flowers or pebbles.

The names of the newlyweds can be written on the bottles

The French style of decoration or decoupage is a unique technique of wrapping with special napkins. Postcards, photos, thematic drawings are recommended as inserts, from which the top layer is removed when soaked. Their surface is varnished. Much can be found in the All for Needlework stores.

Wrapping champagne with ribbons

Among the favorites of decor for banquets is the original look of the "groom" and "Bride", braided with satin ribbons or an oblique inlay. This uncomplicated decor requires unhurried neatness.

Step-by-step master class on decorating wedding bottles:

Another type of decorating wedding bottles with your own hands is our master class on the video.

Painting a bottle of champagne and decorating with rhinestones