06.08.2019

How to tear jeans beautifully and stylishly. How to make beautiful holes and a worn effect on jeans with your own hands: photo and video tutorials on how to beautifully rip jeans at home step by step and make fashionable ripped ones from ordinary jeans

We all know the phrase: “Everything new is well forgotten old.” Now we can see the same thing in the situation with jeans. More precisely, with ripped jeans, which were popular in the 1980s and are gaining popularity now.

Despite the fact that they literally have holes in them and look sloppy, for some reason such jeans are very expensive.

Now you will learn how to make ripped jeans yourself at home!

Where to begin?

First of all, you should take the “starting material”, in the form of a pair of jeans. Some old, “worn” jeans will also work well. Plus, they will look even better in the end than just new ones.

You need to decide on the style in which the transformation of your item will follow:

Grunge. The transverse threads are pulled out and holes are “cut”;
Minimalism. Only the lobar threads are pulled out. Unlike grunge, the transverse lines are not affected.

In addition, you can look on the Internet for photos of ideas on how to make ripped jeans. This way it will be finally clear in which direction to work.

If you are transforming new jeans, you need to give them a “worn” look. This is achieved by washing in very warm water, using “strong” powders

Materials

To make ripped jeans at home, you will need the following tools:

Scissors, knife or blade;
Wood processing paper (“sandpaper”), razor, file or grater;
Soap products or ballpoint pen (chalk) for outline;
Tweezers;
Cardboard (for convenience);
Lace (for decorating jeans);
Needle;
Paper clips or pins.

Work algorithm

Step-by-step instructions on how to make ripped jeans begin with determining exactly where the holes will be. It is best to wear jeans directly on you and use chalk or soap to outline the areas.

Please note: if the jeans are worn, then the holes should not be too large and they should be placed only in those parts where there are no bends; If the jeans are new, then you don’t need to worry about where to place the holes.

Also remember that if the holes are in the knee area, then you need to mark and cut them a little higher than necessary.

Place the jeans with the markings on a smooth, hard surface (cardboard or a wooden board will do).

To create a torn effect, use sandpaper, pumice or a grater.

Take scissors and scrape along the edge of the slit to create a ruffled effect.

Let's move on to the holes in the denim. Using scissors or a utility knife, carefully cut holes along your marks. Try not to make big holes first, as there is a risk of “ruining” them.

Using tweezers, remove the longitudinal threads from the cuts. If it is not possible to remove all the threads, then it’s okay - this way you give a more natural worn effect.

Cut out pieces of denim can also be used in an original way. They can be sewn with large stitches on the wrong side to the jeans themselves. This way the threads will be clearly visible. This “trick” can be used in both men’s and women’s jeans.

If you have scraps from other fabrics, they can also be used for decoration. Almost the same as in the previous tip, they can be sewn to the front side of the jeans. You can even create a pattern using different pieces of fabric.

There is no direct advice here - everyone has different tastes and imagination.

A few more final tips:

You should not make cuts right next to the seams. There is a risk that the seams may start to come apart.

To add an even more worn effect, after all the previous steps to “treat” the jeans, they should be washed.

If you want to make very small abrasions, then use the tip of the scissors blade.

A splash of bleach will age your jeans even more (but don't overdo it).

To make some areas whiter, use the same product as in the previous method.

You need to take chlorine, mix it with a small amount of water and apply the resulting mixture to cotton wool or gauze. Use these lotions to treat the necessary areas with holes. After all these steps, wash your jeans.

Always be fashionable and stylish!

Modern denim fashion invites us to turn our attention to extraordinary and original things. According to fashion trends, we are recommended to wear boyfriend jeans, oversized and with various effects of distressing, rips and wear. Such things can be quite expensive, sometimes twice as expensive as usual. However, if you have the desire and a creative approach, you can make jeans in this style yourself.

About ten years ago, ripped jeans appeared on the catwalks, and many were wary of them. A few years ago, this trend returned again - and denim items with an aged effect (in the form of small rips or large holes) gradually appeared in our everyday life. They are worn not only on special occasions by fashionistas who want to stand out, but also in everyday life by lovers of casual style, handmade and original clothing.

Torn denim is quite popular, especially in the warm season. In modern fashion magazines and on the Internet you can find various photos of torn jeans - both from branded manufacturers and those processed at home. These items are distinguished by slits and decorative damage on the fabric, to which, using a special technique, a skilled craftsman tried to give the effect of natural wear and tear.

How to rip jeans correctly: choosing a style

Silhouettes and styles of ripped jeans should be selected not only depending on fashion, which is currently quite democratic. You should first choose a suitable model for yourself, taking into account the individual characteristics of the figure. Long-legged and slender girls will suit ripped models in various styles, be it skinny jeans or loose boyfriend jeans.

For curvy girls with full legs, denim trousers with slits above the knee are suitable, so that the massive calves of the legs and lower legs are covered. A plump girl will look slimmer in straight jeans with narrow slits placed vertically. Conversely, in order to give the figure the missing volume, thin girls can use ripped jeans with fairly wide horizontal slits, and also make holes in them in the knee area.

How to rip jeans yourself

You can achieve the effect of ripped denim and achieve mind-blowing results without any help. It’s not at all difficult to tear jeans beautifully step by step. You will be happy to wear an item processed in this way according to your taste. In addition, these jeans will be a great gift for a friend. You should not be too zealous with processing the fabric to give it a decorative “ragged” effect, otherwise you risk ending up with a hopelessly damaged item. It will take moderation to intuitively feel how to properly rip your jeans. Thus, you should act gradually and measure the changes made with the result you want to get.

How to rip jeans correctly: preparatory work

To perform this work, you will actually need the jeans themselves. You can buy new ones or use an unused item from your wardrobe to start with - in this way you can turn jeans lying around in the closet into a fashionable new thing. By tearing them decoratively, you can literally breathe new life into them. The best fit is a classic pair of jeans - your size or a little larger to achieve a loose fit. It is worth considering that to give the effect of aging and raggedness, it is preferable to choose an item made of fabric of medium thickness and density. An insulated model with a significant elastane content, made from too thin a material or, conversely, rough denim is unlikely to be suitable. Scuffs and slits on jeans with smoothly flowing shades of color, with the presence of rhinestones and metal rivets look interesting.

How to rip jeans correctly: suitable tools and equipment

It is convenient to make cuts on denim using a stationery knife or blade. Sometimes a medical scalpel or a coarse grater is used for this. In addition, you will need a plate of plastic or plywood (like a small tray or cutting board), which will be convenient to place under a layer of material for further processing, so as not to cut through the trousers.

Also prepare small scissors (manicure scissors will do), chalk or soap for marking, pumice stone or medium-grit sandpaper. Chlorine bleach can also be useful for treating denim.

How to rip jeans correctly: deciding where to cut

First, you will need to familiarize yourself with current photographs on the Internet and choose the appropriate option for yourself on how to tear your jeans. To determine where your jeans will be torn, put them on and use chalk to mark the planned cut locations. The slits can be minimal or large in size, depending on what effect you want to achieve, as well as how much you are willing to show your naked body in the holes and tears. It is worth considering that a small hole in the knee is located in a place of significant tension in the fabric and during wear it can expand significantly, turning into an unaesthetic hole. Thus, to give the “ragged” effect, it is worth choosing a place slightly above or below the knee. After marking, hang the jeans on a hanger and move away some distance to evaluate from the outside what effect you should expect from further processing of the fabric.

How to rip jeans correctly: giving an aging effect

Artistically “torn” jeans go well with the presence of abrasions on them. Thus, in order for denim trousers with a torn effect to look as natural as possible, it is necessary to artificially age them a little before making cuts and holes. To do this, lay the jeans out on a flat and hard surface, place a board or thick plate inside the leg, and then vigorously treat the fabric with pumice. In this way, you can achieve the appearance of light abrasions and a somewhat worn-out effect. It is quite possible to tear jeans at home, making spectacular holes and scuffs in them. In a similar way, you can treat any place on the jeans you wish, including pockets, the outer layer of the belt fabric, or the bottom of the leg. It is recommended to avoid the area around the knees, since minor abrasions in this area can turn into unexpected holes.

Ways to properly rip jeans at home

Most methods for properly tearing jeans involve cutting the fabric with a sharp object and then more or less carefully pulling out some of the threads. Gaps and patterns can be symmetrical or randomly located, close to or far from each other. It is worth considering that the cut may expand due to natural wear and tear, and the slot may become noticeably larger. Thus, this phenomenon should be taken into account when cutting fabric. You can start processing jeans by placing a board under the leg so as not to tear or cut the fabric of the lower layer of the leg.

To create various decorative effects, you can use the following methods to properly rip jeans at home:

How to properly rip jeans: finishing

Jeans with a ripped effect look quite impressive with a slightly bleached fabric. To do this, you can use a chlorine bleach like Whiteness. Dissolve a small amount of this product in water and, moistening a cloth in it, apply it to the fabric of the jeans in the area of the holes and around them. After a few minutes, wash and rinse the item thoroughly.

In general, hand-made ripped jeans should be washed in cool or warm water, and then straightened and dried naturally. It is worth considering that such an item must be washed in a special cover for delicate washing, so as not to damage the fabric (or, if there is none, in an old pillowcase).

What to wear with ripped jeans

By learning how to rip jeans correctly, you can end up with a great item for everyday wear. It is worth considering that ripped jeans go best with everyday clothes in a casual style. The more intricately the model is processed in order to give the effect of raggedness and aging, the easier it is recommended to select a top for it. A T-shirt or T-shirt of a simple style and discreet color that fits your figure or is slightly loose will look harmonious with ripped jeans. You should not make multi-layered and complex combinations with things like feminine blouses and voluminous pullovers.

In addition, jackets and cardigans, as well as leather jackets, can go well with ripped jeans, but such combinations should be selected as thoughtfully as possible. Such jeans themselves are a catchy detail that attracts attention, so it is not recommended to overload the image with additional details. You should not wear stockings or tights under them, as in this case the main idea is lost, which allows you to effectively present stripes of a naked body against the background of jeans to others.

You can wear any kind of shoes with these trousers. Sports options like sneakers and sneakers are ideal; various boots, ballet flats and sandals, as well as classic pumps, will also look harmonious. Depending on the chosen shoes, you should select a bag - you should not wear respectable status items with torn jeans, but affordable backpacks, chests or bags are ideal.

How to tear jeans - video

How to rip jeans correctly: choosing a style

How to rip jeans yourself

How to rip jeans correctly: preparatory work

How to rip jeans correctly: suitable tools and equipment

Also prepare small scissors (manicure scissors will do), chalk or soap for marking, pumice stone or medium-grit sandpaper. Chlorine bleach can also be useful for treating denim.

How to rip jeans correctly: deciding where to cut

How to rip jeans correctly: giving an aging effect

Ways to properly rip jeans at home

To create various decorative effects, you can use the following methods to properly rip jeans at home:

You can get several small holes by making shallow cuts and gradually pulling out a layer of blue denim threads located perpendicular to the bottom of the trouser leg between them from the fabric. To do this, you need to pick them up using nail scissors or tweezers and gradually pull them out one by one or in small bunches. If desired, individual threads should be broken so that they hang beautifully. As a result of these actions, you will get a very decorative hole with white threads at the base;

in order to get the “noodle” effect, you should make several frequent long cuts along the threads on the jeans using a blade, scalpel or stationery knife. The permissible distance between cuts is about 2 cm. Move the tip of the knife slightly along the contour of the hole, ruffle and slightly unravel the threads along the edges of the cuts so that the jeans look torn and not cut. This treatment will give things a more natural look;

You can make jeans torn by a “cobweb” by making frequent cuts along the width and getting rid of a significant amount of threads;

You can achieve the ragged effect by actively working on the fabric with sandpaper, pumice or a scalpel (in this case, they should not be cut, but rubbed). By carefully erasing the blue threads from the front of the fabric in a selected area, and then removing the damaged threads using nail scissors, a needle and tweezers, you can achieve a wide variety of results - depending on your desire;

Another way to properly rip jeans is to make several wide cuts across the leg (most of its width). A more noticeable effect in this case can be achieved if the cuts are frequent. After this, armed with a stationery knife, you will need to clean off the longitudinal threads from the cuts, leaving the transverse ones in place. Pull out unattractively protruding excess threads in the treated area, and carefully comb the rest with a wide-tooth comb. This way you can get the effect of aging and wear at the same time. Small fiber residues can be removed with a vacuum cleaner;

In addition, you can beautifully tear your jeans in the following way: using nail scissors, carefully cut out a small hole (the size of a pea or small coin) in the fabric of the jeans. Using a needle or awl, pull out the blue threads along the perimeter of the resulting hole and cut them with scissors. This decorative “aging” of jeans does not look flashy and is very cute;

In a similar way, you can cut various shaped holes in the fabric of jeans - in the shape of rhombuses, butterflies, stars, hearts, etc. To prevent such an image from losing its shape as a result of washing, the reverse side should be glued with friezeline and the edges should be basted. If you fasten brightly colored fabric from the inside of the tear, ripped jeans will look even more catchy and original.

How to properly rip jeans: finishing

What to wear with ripped jeans

How to rip jeans correctly - photo

At different times, things that look worn out become popular. Remember, there were periods of popularity for patches on clothes, holes, and scuffs. Even famous designers often create collections that look worn. This is not an oddity, but a special country style that attracts many fashionistas. And if you decide to get such a product, you should definitely know how to make ripped jeans. After all, it’s easy not only to buy them, but also to make them yourself.

How to make your own ripped jeans at home

If you have old or new jeans that you want to transform, that's great. This handicraft will not take much time, but the future new thing will definitely be unique and non-standard. It’s not so difficult to make ripped jeans at home, but there are many schemes and technologies. You don’t have to take cutting and sewing courses, but you need to stock up on patience, tools, and imagination.

Tools that will be needed during the work

To transform unsightly jeans and make scuffs on them, you need to prepare holes:

jeans (it is allowed to take trousers from a different material, but the technology for processing them is slightly different);
scissors (preferably for fabric - large, sharp);
a small grater, razor, file or sandpaper (if abrasions are expected in addition to holes);
a stationery knife or blade (it is acceptable to replace this tool with regular nail scissors, but you will have to be more careful when working with jeans);
additional pieces of fabric, lace (if a beautiful feminine decor is intended and sewing it under a large hole as an internal patch);
chalk, pencil or pen (to mark the locations of future holes in the jeans);
a needle or seam ripper (will help pull out unnecessary threads);
tweezers or vacuum cleaner (to quickly remove excess threads);
small sewing needles or paper clips (for fixing patches on jeans).

Scheme

First, determine the places where the holes and slits will be made. Analyze the denim of the trousers. If it is worn out, then the holes should be small and in those parts where bends are not expected (above or below the knees, on the back pockets of each pant leg). If the material is new and is not bursting at the seams, then the shape, placement, and size of the holes can be any. In the first option, they will be easy to do, and you can even pull out the threads by hand, but in the second case, you will definitely need a fabric ripper.

To outline future locations for holes, try on your jeans and start with the places where the bends, knees, and buttocks end. When you take off your pants, these marks will help you accurately determine where the holes and abrasions should be. Draw their full circle, not just a point. If the hole is of irregular shape, it is better to place it so that the largest diameter falls on the shared thread (it stretches less). Some types of sewing chalk are not washable, so a small bar of soap is a better solution.

How to tear jeans beautifully with your own hands: execution techniques

Sloppy holes in grunge style. Very easy to do. In the selected location, strips of different lengths are cut parallel to each other at a distance of 5 mm. The transverse threads are pulled out and removed. If some of the grain threads are damaged, this will add sophistication to the trousers, but in no case will ruin them.
Ripped jeans in a minimalist style. For such trousers you will have to mark several places with small holes. The main task is not to damage the transverse threads, but to remove some of the side threads so that they do not stick out very colorfully. Such holes are often made in the size of 2 cm by 4 cm and are placed closer to the side seams of the jeans.
Frayed holes on trousers are used very often, especially when it comes to large hole diameters. This effect can be easily achieved using a simple kitchen grater, sandpaper or pumice stone for feet. The main thing in this matter is not to touch the threads that remain transverse or lobar, so that the jeans last for more than one month, a year, and the fringe does not tear after the first wash.

Cutting holes on old jeans step by step video

To correctly make holes in jeans and not be disappointed with the result, try doing the same on a small piece of similar fabric. For example, if you have some jeans scrap left, it will be useful for a test version. Try to make a hole on it with threads, different types of abrasions, styles. To consolidate your knowledge, watch the following video:

How to make a scuff using a grater

Ordinary kitchen utensils often come to the rescue in handicrafts. To make a hole in your jeans look old and worn, you will need a simple grater or a piece of sandpaper. Draw tightly along the edge of the hole with small jerks with the selected tool so that the threads fluff up. Carry out similar actions with each edge of the denim hole. You can do the work both from the front side and from the back. After this, additionally bleach the threads with a chlorinated solution.

Please note that the back of jeans often looks more original than the front side. If you have extra pieces of this fabric, try making a patch like this on the front of your trousers. You can sew the patch with large stitches so that the threads are visible. Such an addition would be quite appropriate for both men’s and women’s clothing. You can create a pattern from pieces of other fabric (optional). Improve your jeans so that they can complement both a romantic, feminine look and a sporty, daring one.

Bleached holes

To make your denim look even more stylish, try bleaching some threads and areas. The easiest way to do this is with a chlorinated solution or other bleach. Dissolve ordinary chlorine in a small amount of water, apply the solution to a small piece of cotton wool or gauze and treat the necessary areas with holes. Chlorine eats into the fabric, and whiteness may not appear immediately, but after some time. Therefore, after treatment, wash your jeans immediately, this way the excess chemical will be removed and the holes will remain in excellent shape for a long time.

When bleaching holes in jeans, it is important to carry out all work with rubber gloves and in the open air. It is advisable to test bleaching on a small piece of the same fabric or on an invisible part of the trousers (under the knees, on the wrong side). If you want to decorate your jeans with white drops, then use a pipette to apply a chlorine solution to the fabric, and place a layer of cotton wool underneath. Once the chlorine is absorbed, it needs to interact with the fabric for about 1 hour, after which the clothing will need to be washed completely.

How to make shorts or breeches from regular jeans

An easy way to update old jeans is to cut them down to shorts or breeches. In this case, you need to outline the height of the future product and break it along the transverse thread. If the shorts are intended to be made without further processing, but with torn edges, then no allowances will be required. They are necessary if, according to the model, a gate is required. For this design, add 3-7 cm to the desired length and trim off the excess. This process will look like this step by step:

Lay the finished jeans out on a flat surface without folds.
Mark with chalk or a pencil the place where the excess length will be trimmed.
We tear off the jeans along the line with our hands or with scissors.
Additionally, we make holes or abrasions (optional), taking into account that the color of the longitudinal thread will be lighter than the main shade of the trousers.
Fold the edge or leave it torn. Ready!

Photo of beautiful ripped jeans

Of the many types of clothing, jeans are the most popular in the world. And no matter how many pairs of these trousers we have in our wardrobe, among them there will always be a pair of our favorites. And if they suddenly lose their appearance due to an unexpected tear or abrasion, it will seem like a real disaster. But don’t despair: today it’s even fashionable, and therefore many fashionistas, on the contrary, are looking for a way to make ripped jeans from worn or completely new trousers.

How to make ripped jeans

So, to make a fashionable thing, you first need to take out a pair of worn-out but loved jeans from the bins of your closet and try to make them torn.

For such experiments, medium-density denim is better suited.
You will also need a sharp knife, you can use a stationery knife.
A small piece of plywood.
A piece of chalk and a vacuum cleaner, which will be used to remove lint and threads after cutting.

First, you should decide on the degree of “vandalism” you want: small abrasions, discreet cuts or super torn trouser legs. However, it is important to take into account that tears in the buttocks or knees often look ridiculous, so you need to think carefully about where to cut the tissue. After this, you need to outline the pattern of cuts as clearly as possible with chalk. Then the trousers are hung at eye level to evaluate the result from a distance. When everything suits you, you can begin action.

For your first try, it’s better to take jeans that you don’t mind ruining.

Before that, you need to place a small plywood under the places of future cuts on the jeans. This is done in order to make the cut as evenly as possible without damaging the opposite part of the jeans. Then a neat cut is made across the selected trouser leg according to the intended pattern. After all the cuts are made, a certain part of the threads perpendicular to the cuts is removed to weaken the transverse threads, which are quite strong and slightly lighter than the main color of the trousers, which will add style to the decor. It is advisable to make cuts at the same distance.

If there are large gaps between them, for the best effect you need to do them a couple at a time, and cuts made close together are an ideal option. After making the cuts, you need to use a knife to clean the longitudinal threads from the remaining lint. All that remains is to use a vacuum cleaner to completely remove any remaining threads.

To make your own ripped jeans more effective, you will have to arm yourself with bleach containing chlorine and carefully walk along the edges of the torn areas. In order to stuff your hand, you need to do this process on a separate piece of denim or in an inconspicuous place on your trousers.

If you want to decorate torn denim trousers with lace, you just need to turn the jeans inside out and sew openwork fabric under the cut areas, which can be purchased at any fabric store or simply cut from an unnecessary lace blouse. Black lace goes well with dark jeans, and gray or white lace with light jeans. The lace is sewn on with fine stitches using threads to match the color of the jeans. It is also important not to stitch the trouser leg all the way through, but try to capture only the inner threads, which will avoid untidy stitches around the perimeter of the cut. Upon completion of work, you need to wash the jeans and iron them. These trousers are washed by hand, placed in a gauze bag or an unnecessary pillowcase, since the washing machine can completely tear them.

If you are still not sure that you can handle decorating your favorite trousers, you can watch a video tutorial, for example this one, before making ripped jeans:

An action seen, rather than just read, is always perceived better.

After the appearance of such outfits on the streets of cities, older residents were generally shocked by them. Therefore, it is all the more necessary to be able to correctly combine them with the rest of your wardrobe. Although many stylists believe that ripped jeans can be safely worn with all more discreet things and literally with any shoes. But at the same time, it is important to adhere to the basic rule: the upper part of the outfit must be harmoniously combined in style with the shoes. And if we talk about specific options, there are a lot of them:

A blouse and high-heeled shoes combine interestingly and stylishly with ripped jeans, which is ideal for a party;
in your everyday wardrobe, ripped jeans can be combined with a classic, practical top and flats without heels;
on a country trip, you can wear ripped jeans and a loose T-shirt with sneakers;
on hot summer days, it is appropriate to complement ripped jeans with a chiffon tunic and high wedge sandals.

Jeans with holes go with absolutely any shoes. With elegant pumps...

...with open heeled sandals...

...with ankle boots...

...with ballet shoes...

...with brogues or oxfords...

...with sneakers...

...and even with flip-flops.

True, sometimes, even after practicing how to make old jeans torn, you can get an undesirable result. But don’t be upset: firstly, the trousers were originally old and you probably wouldn’t be able to go anywhere in them. Secondly, even in these jeans you should feel irresistible, because you certainly won’t see anything similar on anyone else. Besides, maybe this particular form of cuts will soon become fashionable, perhaps even thanks to you. After all, for so many years now, these torn outfits have been trendy clothing, then slightly losing ground, then again soaring to the top of fashion. And they differ precisely in the way they cut denim. Stylists believe that ripped jeans will not fall into oblivion very soon and therefore give a completely reasonable hint: everyone should have these stylish pieces of clothing in their wardrobe. And there is absolutely no need to spend huge amounts of money on purchasing ripped jeans made by famous designers. You can transform your favorite, albeit old, denim into a very stylish thing yourself. The main thing is desire, attentiveness and a flight of imagination.

Celebrities in jeans of varying degrees of ripping

By the way, having learned it, you can supplement the experience gained with fantasy details and then you will get a completely new style of daring trousers.

So, to make ripped jeans more impressive and challenging, you should have some free time, a lot of patience, and add a couple of slits on the pockets or on the belt to the standard holes or abrasions.

You can also try to go beyond the generally accepted framework and cut out round holes, give them the shape of hearts or triangles. These figures can be trimmed with floss threads, decorated with rhinestones, lace, sequins, ribbons, and beads. After testing all possible types of “torture” on jeans, you can easily and safely even make... curtains from them. After the first trousers, your hand will gain sufficient experience, and you will be able to continue not only to become more sophisticated in decorating ripped jeans, but also to practice performing other design feats.

Making a fashion item with your own hands

Besides, how to make trendy ripped jeans using the method of cuts, our needlewomen are looking for the answer to the question of how to make jeans frayed or truly torn. Unlike the first method, in the second, sandpaper or pumice will be added to the tools necessary for the “operation”. As before, the model you like is selected. It is not so important where the prototype is taken from - from the Internet or a boutique. The main thing is to decide on the method of decorating: holes, slits or abrasions. After all, jeans are considered torn even if they simply have abrasions, which after machine washing will themselves turn into natural holes. Use a pencil (or chalk) to mark the locations of future holes. Again, before you make beautiful ripped jeans, it's important to remember that vents look best below or above the knee. So, the trousers are laid out on a smooth surface. Then a block or plastic is placed between the legs under the intended place. When making slits, the fabric is cut along the drawn line with a utility knife. The transverse threads are pryed up with a needle and removed with tweezers. The holes are made in the shape of the letter “H”, and to make the cross threads easier to remove and the hole to look visually larger than it actually is, the cross bar in the letter needs to be made a little longer. You can also make two slits in parallel, and carefully remove the short longitudinal threads, which is very important in how to make beautiful ripped jeans. To perform abrasions, the prepared area must be rubbed with pumice. For a more original effect, you can scratch the intended area on the jeans with a razor. Again, the perimeter of the abrasion, cut or tear is treated with bleach and the jeans are finally washed.

Making jeans with holes and scuffs

Such unpretentious trousers also have certain requirements for a woman’s body type, depending on their cut. It turns out that straight trousers are suitable for large hips. The holes in this case are located vertically and not too often, which will give the figure a slim and visual elongation. When deciding on the ideal figure, you can choose any cut, but skinny denim trousers with provocative slits on the knees and hips will most emphasize your slimness. If you are short, holes should be placed only in the upper part of the trousers or on the calves, which will make the figure more defined and light. The most desperate girls can choose acid or neon jeans for even more brightness, which will make the image even more daring. True, to go with this color of jeans, you need to choose neutral light-colored things, so as not to turn into a palette of poisonous tones, from which simply ripped jeans will turn into “eye-opening” pants. After all, it is important to adhere to balance and harmony in everything, even in matters how to make stylish ripped jeans, which will help to emphasize not only individuality, but also the sense of proportion and taste of the owner of such trendy trousers.