Curly patches for jeans. Patches for jeans. Sewing jeans on a sewing machine

Every person likes to wear clean and neat clothes, but not everyone likes to take care of them. But proper care helps to extend the life of things, which means reducing the cost of purchasing new things. The rules are usual: washing things no more often than they require, and timely repairs.

Why throw away a good thing that can last for more than one season? Most often, defects that appear on clothing can be eliminated on your own. Today, few people remember that clothes can be mended or patched. But today patches are in trend.

Let's consider possible options with patches that allow you to tidy up your jeans. These methods will be available even to a novice needlewoman.

Jeans tend to fray or tear in a variety of places, which means the technology of work will change. If you sew a patch on the knee, it will be noticeable even if done very carefully, but patches on jeans between the legs can be placed so that no one will notice.

For the highest quality work, it is best to sew the patch on with a sewing machine. It allows you to carefully and without problems sew up holes along the seams of the product, which is very convenient. With the same care, you can put a patch on jeans by hand. You can make it barely noticeable, or you can do the work so that it clearly catches your eye.

Kinds

First of all, you need to understand how to make a patch on jeans, what types of patches there are, what are the differences and advantages of each of them. Let's start in order.

• Double-sided - used to restore jeans, sleeves, abrasions on knees and elbows. Consists of two parts of the same shape, but different sizes. At the first stage, it is necessary to sew an element with smaller dimensions on the wrong side of the problem area. At the second stage, a larger part is placed on the front side. The seam can be made by hand, since if it is done on a sewing machine, it will be noticeable.
• Set-in - a more decorative option, can be of any shape. Using such patches, you can decorate not only places on the sleeves or knees, but also patch the front part of the product. With the help of such elements, some creatives restore the areas between the legs on jeans. And if you add similar appliqués to the trouser legs, you can get an interesting option.
• An invoice is not a very reliable type of work, but it is the simplest. If the work is done correctly, such an element will be almost invisible, but in terms of its service life it will not last long. The work consists of sewing a suitable flap from the front side to the surface of the product using a hidden seam.

Patches

Most often, there is no desire to part with your favorite jeans, even when scuffs or holes begin to show through. But with the help of patches you can extend the life of your favorite thing.

How to patch up holes in places where they are especially inappropriate? Most often, the first abrasions and holes in jeans appear between the legs. A carefully executed patch on jeans will make it possible to extend their service life. We offer one of the methods for such repairs.

How to make a patch between the legs of jeans by hand

What should be the patch on jeans between the legs? If there are no separate fabric samples that match the color of the jeans, you can select a patch that matches the color or texture and do the following:

• First of all, it is necessary to cut off the protruding threads from the edges of the hole.
• Then process its edges manually along the entire perimeter with frequent stitches. This will prevent the fabric from fraying.
• Now you need to decide on the size of the patch so that it can completely hide the hole.
• Secure the patch using safety pins. When performing work, you need to ensure that there are no creases or waves.
• Use a needle to grab the patch on several sides with several stitches to secure it.
• Stepping back about 3 mm from the edge, sew the patch with small stitches (no more than 3 mm).
• Make a tight knot on the last stitch to secure the sewing.
• When finished, you can strengthen the hole itself to the middle of the patch, pressing it tightly against the jeans themselves.
• The seams should not be tight, without creases or hard protruding seams.

How to make a knee patch

It is not uncommon for holes to appear in the knee area. This is especially true for children. But buying them new trousers every time is a complete waste, so knee patches on jeans will come to the rescue. Such patches can be made unnoticeable, or, on the contrary, repairs can be made so that it becomes a stylish decorative element.

Let's consider the second option in more detail.

• First you need to prepare a piece of fabric in a contrasting shade. You can cut such a piece from an item that no one will probably wear anymore, and decide what shape and size the patch on the jeans will be.
• If you are still new to this business, then it is better to first prepare a pattern from paper and then transfer it to fabric.
• Fold the patch over the edges and baste.
• Iron around the perimeter with a hot iron.
• Now, using neat stitches, you need to sew the patch to the trouser leg by hand or do this work on a sewing machine.
• If desired, a similar patch can be made on the second leg.
• After work, it is best to wash your jeans and let them dry naturally.

It is not always possible to choose denim that matches the color of your trousers. And you don’t always want to waste your time buying these few centimeters. Many needlewomen managed to get out of this situation using different patch options.

Native fabric

The easiest way is to patch jeans made of fabric that matches the color and texture. In order not to go to the store for fabric, you can use a fragment cut from the trousers themselves. This place is under the back pockets.

In place of the cut out fragment, you can hem another dense fabric, since it will not be visible anyway. You just need to choose a dense material and carefully plaster the jeans from the wrong side.

Adhesive fabric

It has another name - “cobweb”. The material is good when working with abrasions rather than through holes. To do this, a section of the jeans is steamed and a “cobweb” is glued using an iron. After which it is recommended to sew the resulting result with a zigzag seam on a sewing machine, having previously selected threads to match the color of the product. In some cases, after washing, the patches may come off, sometimes along with this area of ​​the jeans.

Ripped jeans have been at the peak of popularity for several years now. And jeans decorated with decorated patches can look especially feminine and elegant. True, we should not forget that the riot of imagination must still border on common sense.

• To create a slight “worn look” on the trousers, a couple of threads are carefully pulled out in the area of ​​the hole so that the edges look slightly frayed.
• Another option is the possibility of using lace to patch holes. It will look stylish not only on women's jeans, but also on children's jeans.
• For a glamorous shine, you can use a scattering of rhinestones or beads. You can make repairs in the form of ornate patterns across the entire surface of the legs or make a patch on the jeans between the pockets or along the bottom of the trousers. In such an outfit it is difficult to remain unnoticed.

As already said, the patch can be viewed not only from the practical side. The designer’s vivid fantasies can also be expressed in the decor of children’s things. Let's present some solutions that can be original and funny:

• You can make interesting children's applications (ready-made versions can be bought in specialized stores).
• One large patch can be replaced with several small ones (using scraps of fabric or leather, which are also sold in stores).
• You can close small holes with neat embroidery using beads or sequins.

Everyone knows how to put a patch on jeans, but not everyone believes in the success of their needlework. In fact, such work does not take much time. And the appliques offered in the store are generally easy to glue with an iron.

These patches can also be used to close rips in jeans. Decorating rough jeans with lace inserts looks especially impressive. For this purpose, you need to prepare the guipure you like; it can be any color your imagination desires. Lace inserts are designed in the same way as regular patches on the reverse side. You can make a small fringe along the edges of the hole.

The peculiarity of the weaving of threads in denim allows you to make the patch on the jeans almost invisible. With a high-quality patch, your favorite trousers can last for many more months.

Most often, holes in trousers appear in case of mechanical damage or due to friction during use. But sometimes you don’t want to part with your favorite thing. To make it last a long time, they use patches, the role of which is not only to eliminate holes or any abrasions, but also to decorate things, giving them a more original look. Moreover, it is not difficult to do; even a beginner can do it.

Many modern girls prefer creative jeans models that allow them to emphasize their individuality. We are talking about abrasions, holes, fringes and, of course, unusual patches that make jeans original and unique. Beautiful patches on jeans were first used by representatives, and designers borrowed this idea from them, bringing it to perfection. Today, ripped jeans with patches are both a demonstrative protest, a powerful tool for self-expression, and simply a fashionable thing.

Jeans are a huge field for creative experiments. You can sew decorative patches on jeans yourself, as this does not require any special skills. Denim is great for experimentation, and the variety of techniques allows you to embody any ideas.

Fashionable patches for jeans can be made independently or purchased ready-made in specialized stores. Depending on what type of patch you purchased will determine how you will sew it onto your jeans. Creative patches on jeans can be sewn on the top or the reverse side by cutting a corresponding hole or making narrow slits. Suitable materials for patches include pieces of denim, lace, and bright scraps of other fabrics. Stylish leather patches on jeans look no less impressive. This material is good because it does not lose its appearance when washed, and its texture is not inferior in density to the texture of denim. It is better to sew leather patches on jeans not by hand, but using a sewing machine, so that the decor looks neat. Thanks to threads of contrasting colors, beads, buttons and other decorative elements, you can create a mini-masterpiece that will completely change the appearance of ordinary jeans.

In addition to being decorative, patches also serve a utilitarian function. With their help, you can easily hide defects on jeans such as scuffs, stains that cannot be washed off, and burnt spots. Imagination and a scrap of beautiful material will help save jeans, giving your favorite clothes a new life. Use your imagination and don’t be afraid of fashionable experiments!

Hello, dear readers of the cutting and sewing site ideaport.ry - “Sewing Circle”. Everyone who wears jeans sooner or later begins to suffer from the appearance of holes in them. Some, however, do not suffer, but enjoy it. And they, jeans, can be your favorite. Moreover, if they were worn to the bone, then they are definitely loved ones... Even if everything else about these wonderful pants is wonderful, they simply cannot be worn because of these annoying “gateways” that often appear in the most intimate places... Today we are putting patches on jeans with hot glue...

How to do patch on jeans between legs Already discussed on the resource. Was also considered. Minor damage darned carefully. Used on small denim patches and adhesive elements. All of the methods already discussed on how to put a patch on jeans between your legs have both advantages and disadvantages. Basically it comes down to appearance and durability. Which option is best? Let's consider another method. Not a very labor-intensive, technologically simple way to install a denim patch. And not an expensive way.

Step 1: Materials Needed

1. fabric patches. (You can use whatever you like, but scraps from other jeans are best. The patch should be large enough to cover the hole and its adjacent areas.)
2. glue gun
3. Iron (At least one that heats well. Large selection)
4. Electrical voltage (Normal socket).

And despite all of the above, you need a pair of jeans with a hole in them.

Step 2: Turn the jeans inside out and apply glue to the patches

Before putting the patch on the jeans, they are turned inside out. Glue is applied to the patch using a hot-melt gun. Even if the glue cools down. It's reusable. When ironing a denim patch, the glue will again become viscous and even liquid. You just need to make sure that the layer of glue is applied evenly. Otherwise, it may turn out that voids are formed, which will potentially become discolored in the future. Excessive glue may interfere.

Step 3: Apply the patch over the entire area of ​​the hole and iron it with an iron

1. We apply a patch with glue applied over the hole so as to cover it completely. This is her last port of call.
2. Place a hot iron over the patch and wait for the glue to melt. After this, once the patch has cooled, you can tactilely check the surface of the patch with your fingers. If the glue sticks out through the surface of the denim patch like rails, then a hot iron will help again.
3. Let's wait until the denim patch cools down before tugging at it. Usually, this only takes a few minutes.

Step 4: Done!

All is ready!

The photo shows that there are denim patches on both sides of the middle seam. From the front side they are practically invisible. Once again, beware of over-applying glue as this may cause discoloration in the future.

The hole before gluing, in principle, can be sewn in advance. The whole point of gluing a patch to your jeans is to prevent stretching. If the patch on jeans is simply sewn on, then the stitches are placed on the already weakened fabric.

Also, note that the result of installing denim patches on glue is that they are quite flexible. No one will feel anything while moving. Excellent washability in the automatic machine. Erased precisely five times without changing characteristics . Factory adhesive patches cannot withstand so many washes...

Good afternoon, my dear readers))). Today I’ll just share with you my practical experience, not so long ago they came into fashion. patches, on the elbows of jackets and sweaters, on the knees of trousers and jeans. But this fashion can be applied not only from the side of fashion and beauty, but from the side of practicality.

So how sew jeans for a child I wrote finished denim pattern for 2-5 years.

These are the updated ones jeans with knee patches It worked out, this process took me 10 minutes, and my son will continue to wear his favorite jeans.

How to make patches for jeans?Good afternoon, my dear readers))). Today I’ll just share with you my practical experience; not so long ago, patches came into fashion on the elbows of jackets and sweaters, on the knees of trousers and jeans. But this fashion can be applied not only from the side of fashion and beauty, but from the side of practicality.

In this post I will tell you how I made patches on the knees of jeans for a child. I think it's no secret that the weakest point on any children's pants or jeans is the knees. They wear out and become completely holey in just a few days. I have a son growing up, and mothers of sons will especially understand me, since boys are usually more active, do not spare purchased or sewn clothes, and I do not consider it necessary to forbid a child to crawl, sit up and get his jeans dirty. I am humbled by the fact that beautiful jeans are only the moment they are worn for the first time))))

So, I wrote how to sew jeans for a child here, a ready-made pattern for jeans for 2-5 years is here.
You may also be interested in:

How to sew jeans between your legs?
How to make trendy ripped jeans
How to make fashionable holes in jeans with your own hands

These were the beautiful jeans that were originally made:

A little time passed, and they developed scuffs on the knees. If these weren’t my son’s favorite jeans, I wouldn’t have thought of putting patches on them...

In order to give these jeans a second life, we cut out patches of any shape from thick denim fabric.

I made the patches oval, it is better to use very thick jeans for them, then the patches will turn out better.

We first pin the patch on one pant leg over the worn area on the knee, then pin it symmetrically on the second leg, making sure that on both legs the patches are at the same distance from the side seam and in height from the bottom of the trousers.

We will not be able to sew a patch on a machine by simply placing the trouser leg under the needle, since the trouser leg is narrow, even if this is done on jeans for an adult, it will be inconvenient to move the trouser leg in the process.

Therefore, we unravel 20 cm of the internal crotch seam.

Now it will be convenient to sew the patch twice in a circle. I deliberately do not process the edges of the patch so that they have a fringe along the edge.

These are the updated jeans with patches on the knees. This process took me 10 minutes, and my son will continue to wear his favorite jeans.

So, if you are a craftswoman, you will probably figure out how to give a second life to your favorite thing)))

Jeans are a fairly durable piece of clothing, but sometimes they rip or fray in the most unexpected places. How to make a patch on jeans, because pants don’t always tear from old age. Many people, due to their body shape, can even wear brand new jeans between their legs. So, should we throw them away two weeks after purchase? What if a child gets caught on a nail while out for a walk, and the budget is not designed for new pants? There is an exit. Uncover your sewing machine and set aside half an hour of free time. We will install patches. Not the ones from my grandmother’s youth, when it was better to fall through the ground in patched pants than to go for a walk. Our patches will be either fashionable or invisible. And we will teach you how to do it.

Invisible patch on jeans

The process of repairing an item using a secret patch sewn in a special way is called gizmo. This is not difficult to do, and even those who do not have much experience in sewing on a sewing machine can do it. You just need to know how to use the machine and be able to stitch in a straight line.

Very often, jeans fray between the legs and this can be corrected using the gizmo method, since you can’t put a decorative patch there, except maybe a leather patch like a cowboy’s, and you can’t cover it with embroidery. What is needed for this and how to sew a patch manually?

Required equipment:

1. Select a piece of base fabric - the one that will be on the inside. This can be a special fabric for adhesive-based patches, which is sold in sewing stores.

Important! You can take lining fabric (non-woven fabric, dublerin) or just any scrap available in the house, but the main thing is that it is soft, not thick and not friable.

1. Choose sewing threads to match the color of your jeans. It is better to go to the store directly with them to choose the perfect ones.

Important! Thread thickness should be No. 35-45. Knowledgeable craftsmen advise: “The thinner and more elastic the thread, the better.”

1. Prepare pins or thread with a needle for basting.

Procedure:

1. Turn the jeans inside out and straighten them well.
2. Apply paper to the worn areas, circle the hole and make a template for the required patch.
3. Place the template on the base fabric, cut out the patch of the required size and shape.

Important! The main thing is that the patch is larger than the hole by 2 cm around the entire perimeter.

1. If the fabric is adhesive, then carefully and evenly apply it to the desired place with the sticky side to the jeans, press with a hot iron.

Important! The best iron operating mode for this will be “cotton” + steam.

1. If it is ordinary fabric, then baste it with thread or secure the patch in the desired place with pins

Important! If you choose pins, use ones that have eyes rather than beads at the end so that they do not interfere with the machine's foot moving across the fabric.

1. Once you have secured the patch from the inside, turn the jeans right side out.
2. For convenience, outline with chalk the area where the patch is applied.
3. Wind the bobbin with the same thread you will be sewing with.
4. Adjust the thread tension on the sewing machine, you can even loosen it a little on the top one.
5. Now start stitching from one edge of the hole to the other, going 1.5-2 cm beyond its edges.

Important! Sew with a zigzag, but you can also use a simple stitch of medium length, in the same direction as the threads on the jeans.

1. When you reach the end, move 1 thread to the side, switch to reverse (reverse), make the same stitch.

Important! If your sewing machine does not have a reverse function (reverse function), then when you reach the end of the stitch, lift the presser foot and turn the jeans over in the opposite direction. And this will have to be done every time you reach the border of the patch.

1. Place the stitches thickly, close to each other, until you have mended the entire hole.
2. Having finished with the longitudinal lines, move on to the transverse ones. Sewing is the same: forward - backward.

Important! The transverse stitches should also coincide with the direction of the jeans threads.

1. Watch carefully so that “unnecessary” areas of the pants do not fall under the foot. Then it will take a very long time to rip everything apart.
2. When you've finished sewing and are able to patch the jeans, turn the pants inside out and trim off any excess basting or pins.

All is ready. Now there is no trace left of the rubbed areas; they are sewn up firmly and inconspicuously.

Important! With the help of the thing you can patch other places on your jeans, for example on the knees.

Decorative patches

A patch, according to the dictionary, is a piece of fabric sewn over a hole for the purpose of repair. If previously a patch turned a possibly new item into an ancient cast-off, now it is an element of decor and a fashionable accent. Now they are not only not embarrassed, but they are also sewn onto completely intact clothes. But before you decide to take such a step and make a patch on your jeans, you need to decide on its type so that the decor matches the overall style of the pants and your image as a whole.

Double-sided

Two patches of the desired shape are cut out, but the second one is slightly larger. The smaller one is secured around the hole with any seam from the inside, and the larger one is applied from the outside and secured with a hidden seam.

Set-in

The hole is given the correct shape, its edges are folded and hemmed inward. The patch itself is placed on top and secured to the fabric with a hidden seam. That is, they replace the defective area with a new one.

Important! Depending on where the tear is in your pants, it may not make sense to try to repair them. Use our ideas to improve your usual clothes and make them more fashionable. Read the following articles:

Invoice

To cover a stain or hole, a patch with the edges folded inward is applied to the front side. Sewn with a blind or machine stitch.

Lining

A patch made of the same fabric as your item, or vice versa - contrasting, decorative, is placed on the inside and basted to the fabric with frequent running stitches.

Artistic

This is a type of patches in the form of pockets, logos, flowers, animals and other interesting shapes that are used to repair an item and at the same time decorate it. You can make such a patch on jeans not only to decorate areas with defects, but to strengthen those parts of clothing that are susceptible to high friction. For example, elbows on a jumper or knees on the pants of a little fidget.

What options might there be:

• Now in sewing stores there are a lot of types of ready-made decorative patches, most of which have hot-melt adhesive applied to the reverse side. You can choose a funny dog ​​face for a child, a beautiful rose for a girl, or a football team logo for a man. All that remains is to carefully apply the stickers to the jeans and press them with a hot iron.
• You can make an artistic patch yourself. To do this, you need to select a suitable piece of fabric. It should not differ much in type from the material of the clothing and be a couple of centimeters wider than the hole. Next, cut out the desired element from it (a circle, a pocket, a star, a flower, an arrow, a pyramid, whatever your imagination tells you) and process the edges.

How to sew a patch by hand?

Not everyone has a sewing machine in their house, and even if such a machine was left over from their grandmother, girls do not always know how to use it correctly. In this case, in order not to aggravate the situation, it is better to sew the patch manually. How to do it? - One of the following methods:

• You can sew by hand using a hidden seam. Or you can, on the contrary, sew it on with bright embroidery threads, decorate it with sequins or beads.
• If you prefer the Grunge style in clothes or just a little carelessness, then you can sew a patch cut from old jeans onto your favorite jeans. Rip the threads along the edges of the flap and sew it on with a rough seam by hand.

If your jeans have a tear in the fabric at the knees, and you don’t want this “fashionable touch” at all, you can enlarge the hole a little, artificially create one symmetrical to it on the other knee, and sew on a lining patch made of bright fabric or fabric with sequins.