Simple ideas and step-by-step instructions: how to wrap a gift in gift paper. How to pack a gift in gift paper: original ideas

The easiest way to pack a gift is to wrap the finished box in wrapping paper. After all, very often the things we buy as gifts are already in a cardboard box. In this master class - how to pack a box in gift paper. In fact, there is nothing complicated about this, you just need to know how to correctly calculate the dimensions of the packaging paper and how to properly wrap the box in paper.

What will you need to pack the box?
- wrapping paper;
- decorative ribbons, cords;
- scissors;
- tape measure;
- double-sided tape (try to buy double-sided tape, since pieces of ordinary tape are very noticeable and will need to be carefully masked).

How to determine the right amount of paper for packaging
In order to pack a rectangular or square box, we need to cut a rectangle out of wrapping paper, respectively. To determine the width of the rectangle, take a measuring tape and measure all four sides of the box around the perimeter (a full turn), and add 2-3 cm for the hem. And the length of the rectangle is one length of the box + two heights of the box.

A little advice
If you are packing for the first time, do it on regular newspaper first. See if you have determined the dimensions correctly, where the tape should be located, how the folds look, etc.

How to pack a box. Basic steps.

Step one. Place the gift box in the center of the rectangle of paper. Bend the left or right vertical edge by 0.5-1 cm, glue a strip of double-sided tape to the fold.


Step two. Wrap the box tightly with paper as shown in the photo. Then remove the protective layer from the tape and glue the folded edge of the paper.



Step three. Check that the protruding edges of the paper at the ends of the box are the same. Then bend the top of the paper as shown in the photo, pressing it tightly against the end of the box.



Step four. Fold and press the sides of the paper tightly.



Step five. First bend the bottom part and press it tightly against the end of the box. Then bend it back and bend it approximately in the middle. Place a strip of tape on it and glue this part to the end. Do the same on the other side of the box.





How to decorate a box wrapped in paper

1st option. Cut a small strip of paper of a different color, wrap it around the box, and tape the ends together. Tie with decorative cord.





2nd option. If the wrapping paper is double-sided, then you can leave a larger allowance in width and use this for decoration.






3rd option. You can use several ribbons of different colors and textures.











4th option. You can use openwork lace, the ends of which are also connected with double-sided tape.




In general, there are a huge number of decoration options; we have given you just a few to stir up your imagination a little.

You can pack the purchased gift in a special section of the store, where you can be offered different types of wrapping paper and several types of bows. But if you want to make your gift original and unusual, then DIY gift wrapping.
Before you think how to wrap a gift with your own hands in a beautiful and original way and start choosing packaging material, you should take into account that different people have different attitudes towards gift wrapping:


- DIY gift wrapping for men should be restrained and laconic, there is no need to use all kinds of bows and decorations in it - men simply will not pay special attention to this and will not appreciate your efforts. Choose wrapping paper that is plain or has a clear geometric pattern. If you have a choice, you can choose a paper that matches the man’s hobby or profession (with musical attributes, for example);


- corporate packaging gifts should also not be flashy colors; it is best to use paper bags or handbags with the company logo. In this case, it is better to place a wholesale order; you are unlikely to be able to do it manually;


- in a DIY gift box for woman You can fully express your imagination and use all possible materials - beads, sparkles, ribbons, rhinestones, feathers, etc. Although, women are also different, so focus on personal preferences;


- children's gift Naturally, it should look childish - use bright rainbow colors, balloons, candies, funny appliqués, stickers of your favorite cartoon characters, small toys, etc.


- DIY gift wrapping must take into account theme of the celebration and use different attributes and characteristic colors. For example, gifts for the New Year can be decorated with Christmas tree branches and bells, and gifts for the bride should be combined with her wedding dress.

Depending on the form of the gift itself, handmade gift wrapping, is divided into two groups - hard gift wrapping (when the gift is in a hard cardboard box) and soft gift wrapping (when the irregularly shaped gift itself is packed in soft packaging material).

Solid Packaging Methods.

1) Wrap the finished box in paper. Often purchased gifts are in a ready-made factory cardboard box. In this case, your efforts are minimal - you just need to pack the finished box in wrapping paper with your own hands and decorate it with various accessories.


2) Cover the cardboard box with packaging material. If you purchased a gift without a box, then you can get out of the situation by covering a finished box (for example, a shoe box) with packaging material or fabric with your own hands, and putting the gift in a beautiful box, which is then tied with a ribbon. For breakable items, you can put a special filler in the box - silk paper, light fabric such as chiffon, decorative feathers, dried flower petals, etc.

3) Make a gift box with your own hands. If the gift is small in size or irregular in shape, then you can make a box for it yourself from colored cardboard or scrapbooking paper, which can now be purchased quite easily. There are a lot of ways here - all kinds of boxes, chests, bags and envelopes, as well as boxes made in origami style.

Soft packaging methods.

1) Wrap the gift itself in soft, easily draped packaging material. This can be special crumpled paper or tissue paper, which is sold in large stationery stores. Corrugated packaging paper, polysilk, and soft felt paper are also suitable. In this case, the gift is wrapped in the form of candy, tied on both sides with ribbons or decorative cords. Or you can choose a truffle shape, where only one end is tied with a ribbon, and the other becomes a stable base.


2) You can use the Japanese technique of wrapping gifts in fabric - furoshiki., which has a number of advantages compared to paper packaging. Firstly, such packaging is considered the most environmentally friendly - the fabric can be reused and not thrown away like paper after unpacking the gift. And secondly, thanks to a wider selection of colors and fabric patterns, greater expressiveness and individuality can be achieved in gift packaging.

3) You can sew a bag with your own hands from fabric, felt paper or even thick paper and put a gift in it, and then decorate it with ribbons and accessories.

How to decorate a wrapped gift.

This is a truly creative process that expresses your individuality, so you can use whatever you want. To decorate a gift wrapped in paper (or other material), paper and satin ribbons, lace, decorative cords and ropes are used. You can also use foil, tinsel, sparkles, beads, beads, chains, stickers, various tags and labels, feathers, dried flowers and leaves, shells, small stones, buttons, coins, etc.

Now how to tie a ribbon beautifully.

So, we have a box of the correct rectangular shape, wrapped in wrapping paper. You need to beautifully and neatly tie a ribbon or any other decorative braid, lace, rope, etc. on it.


METHOD No. 1

1. Tie the gift box crosswise and secure with a knot in the center. For a more convenient description, let's designate the ends of the tape with the letters A and B.


2. Take ribbon A and make first one and then a second loop for the bow so that they look like a figure eight (see photo). Using your fingers, press the middle of the figure eight against the center knot of the ribbon. Part B is on the sidelines for now.




3. Holding the figure eight bow with one hand, with the other hand take ribbon B and cover the middle of the figure eight with it, wrap it around the central knot and make another loop, only from ribbon B. Straighten all the loops and make them the same. Trim the ends at an angle.







METHOD No. 2

1. Separately fold the bow following the instructions in the photo.




2. Tie the box with a different type of ribbon. It is best to use contrasting but compatible colors of ribbons. And the tapes themselves are of different widths.



3. Attach the finished bow to the center and tie the ribbons so that the resulting bows are perpendicular to each other. 15 ways to wrap a gift in an original way with your own hands!

The new review has collected the most original and most reactive ways to pack a gift for the New Year. Definitely for sure - a good gift is important, but with good packaging its value increases many times over.

1. Paper feathers


Gift wrapping complete with paper feathers.

Even the most inconspicuous wrapper, complemented by original feathers cut out of colored paper and decorated with gold paint or sparkles, will look stylish and original. In addition to colored paper, pages from old books, leftover wallpaper, or even regular white sheets are suitable for making feathers. To make the product as neat as possible, it is better to use a pre-prepared template.

2. Chic and shine


Packaging decorated with paper with glitter and artificial branches.

Instead of banal wrapping paper, gifts for loved ones can be wrapped in simple craft paper. And to prevent the packages from looking too boring, decorate them with wide ribbons of thick paper with glitter, an artificial green twig and tags with funny inscriptions.

3. Laurel wreath

Gift packages decorated with laurel wreaths.

Boxes with gifts packed in craft paper can be decorated with an artificial laurel wreath, and ordinary twine will help secure the composition.

4. Spruce branches


Snowflake made from fir branches.

People with delicate taste will certainly like the idea of ​​packaging treasured gift boxes in stylish black paper. And you can decorate such a wrapper with the help of snowflakes made of fir branches and large dots drawn with corrector or paints.

5. “Winter” drawings


Drawings on wrapping paper.

Simple thematic pictures drawn with a white marker or proofreader are another great way to decorate gifts wrapped in black wrapping paper.

6. Jars


Gifts in glass jars.

In addition to the usual boxes, you can use glass jars to pack small gifts. You can put a little cotton wool, hay or polystyrene at the bottom of the jars, and decorate their necks with ribbons, bright tags or New Year's candies.

7. Marble and gold


Wrapping paper decorated with gold foil.

Wrapping paper of your own design will make gift boxes truly exclusive and stylish. To do this, print the desired template on plain paper, wrap the gifts in it and modify the packaging yourself. Marbled packaging, decorated with thin golden touches of foil, will look very trendy this season.

8. Large flowers

Boxes decorated with large flowers.

Instead of the usual ribbons, you can decorate gift boxes with large flowers made from corrugated paper.

9. Fabric packaging


Fabric packaging and decor.

The fabric packaging looks very original, stylish and cozy. In addition, such packaging can be made in literally five minutes, without spending a penny, because the material for its creation can be found in your closet. To create fabric packaging, it is best to use an unwanted knitwear item, an old woolen sweater, a bandana or a neckerchief.

10. Original packages

Gift bags made from book pages.

Pages from an unwanted or damaged book can be used to create creative gift bags. Such packages can be decorated with small pieces of lace, sparkles or simple designs.

Video bonus:

11. Sweets

Gifts in the form of candy.

New Year's gifts can be packaged in an unusual way, turning them into bright candies. To do this, the gift itself needs to be shaped into a cylinder. A regular cardboard sleeve or a special box will help you do this. After which, the selected base must be wrapped in wrapping or corrugated paper, similar to how candy is wrapped. The finished product can be decorated with ribbons, sequins and organza.

12. Three-dimensional figures


Packages decorated with three-dimensional figures.

You can decorate simple packaging using various three-dimensional figures, for the manufacture of which small twigs, fabric, colored paper, ribbons and beads are suitable.

13. House

A box in the shape of a house.

A gift box in the shape of a house, which you can make yourself from a piece of thick cardboard.

14. Cardboard box

Gift box made from a sleeve.

A stylish gift box can be made from a regular cardboard sleeve. A small piece of any decorative paper, a wide ribbon, a piece of burlap or lace will help to give such packaging a festive look. Simply wrap the box with your chosen item and complete the arrangement with a thin ribbon, bow or bright ropes.

We all, without a doubt, love receiving gifts. However, we experience even greater pleasure when we bring joy to our loved ones. Eyes sparkling with happiness and a sincere smile of a dear person - what could be more beautiful!

We treat gift preparation quite scrupulously: we take into account the individual preferences and hobbies of the recipient. One of the important roles in this process is played by the festive wrapper, which gives a special charm and mystery to the gift. Did you know that it is very easy to wrap a gift in original gift paper with your own hands? In this article you will find step-by-step instructions on how you can pack absolutely any items with your own hands beautifully, creatively and without much difficulty.

Step-by-step instructions: how to wrap a gift beautifully

Until now, did you think that only specially trained people can do gift wrapping? Big misconception! The most important thing is that all the tools to create such a masterpiece are available to absolutely everyone.

We will need:

  • Scissors;
  • Double sided tape;
  • Gift paper;
  • Ribbons and any other decorative elements.

So let's get started:

1 step: First you need to measure and cut out the required amount of gift paper for wrapping. Please note that you need to measure the rectangle so that you have a few centimeters left on each side of the gift in order to bend the paper evenly in the future. For example, look at how much gift paper was cut in the photo.

On a note! If you've never folded gift paper this way before, you can practice using, for example, some scrap newspaper. Using the finished “pattern” from the newspaper, you can measure the required amount of gift paper.

Step 2: Bend the edge of one of the two vertical sides by 1 cm and stick tape on it. Combine the vertical sides. Stretch the gift paper so that it fits snugly around the gift. If you follow all the rules, you will notice that the seam is almost invisible.

Step 3: Now move on to the sides. Carefully fold the top of the gift paper as shown in the photo.

Step 5: The matter remains small. Place a strip of double-sided tape on the top of the remaining piece of paper (the edge of the paper also needs to be folded). Remove the protective film from the tape and secure the entire side part in this way. Please note that the lower part should end exactly in the middle, as shown in the photo.

Step 6: Repeat the entire procedure on the other side of the gift.

Step 7: Time to start decorating. No gift is complete without a festive bow. We will also make it ourselves. To do this, you need to take three ribbons in shades that match the gift paper. You should tie these ribbons on top of each other, thereby creating the necessary volume.

Step 8: In addition to ribbons, you can decorate the gift with any decorative elements that you have in your everyday life. It turns out this is such beauty!

How to pack a box in gift paper

Tired of the monotony of gift wrapping? Then you are at the right place! Below are step-by-step instructions on how you can pack a box using some very original things. The unusual thing about this type of packaging is that instead of gift paper we will take ordinary newspaper, and woolen thread and buttons will replace the bow. Quite a beautiful and conceptual option!

Step 1: Take a spread of any newspaper (preferably one that has already been lying on the shelf for some time). Don't forget to pay attention to the information that is located there. An uncomfortable situation may arise if the pages contain an article that is unpleasant for the recipient of the gift. Approach this stage with equal creativity. Fold the edge of the newspaper toward one side of the box.

Step 2: Do similar work on the opposite side. Please note that on this side the sheet of newspaper should only reach the middle. Use scissors to trim off any unnecessary parts of our gift paper.

On a note! If possible, place the gift bottom up and start wrapping. All seams will remain invisible.

Step 3: Now you need to move on to the other sides of the package. Fold one of the sides so that it ends in the same place as the edge of the box.

Step 4: Bend the left side edge so that it can cover the left edge of the gift. Leave a small margin of a couple of centimeters. The rest can be trimmed with scissors.

Step 5: Just like in the first instructions, join the left and right sides of the paper using double-sided tape. The stock that we left must be bent and hidden inside.

Step 8: As we have already said, the decorative elements in this case are quite original. Wrap the gift box with thread.

Step 9: Decorate the resulting “bow” with buttons.

How to pack a round gift

We've sorted out the square and rectangular gifts. Now comes the option of wrapping a round gift. This method of gift wrapping is also quite original. Instead of gift paper, we will take a piece of thick fabric and decorate it all with a contrasting ribbon. This way, we don't even need tape or scissors (only if we cut the fabric).

Useful tips

When it’s a holiday and we start looking for the right gift, we want everything to be perfect.

You may have doubts about the gift or be absolutely sure that this is exactly what you need, but beautiful packaging is not enough to complete the picture.

It is not necessary to order or buy special gift wrapping - you can decorate the gift yourself.

On our website you will also find:

  • How to make a box
  • DIY Christmas packaging
  • DIY gift wrapping
  • 15 smart and original packaging
  • How to make packaging for New Year's gifts

Wrapping a gift beautifully (be it New Year's or birthday) is not difficult, you just need to know a few secrets.

It is worth noting that there are many ways to decorate a gift, and you can find out about the most interesting, original, simple and not so simple here.

How to wrap a gift in paper. The easy way.


How to make a gift with your own hands

You will need:

Wrapping paper

Decorative ribbons

Scissors

Tape measure

Double sided tape

First you need to determine the amount of wrapping paper you need. To do this you need to cut out a rectangle.

* To find out the required width of the rectangle, measure the box around the perimeter using a measuring tape. After this you need to add 2-3 cm to the hem.

* To find out the length you just need to know that it is twice the height of the box.

Helpful advice: If this is your first time wrapping a gift, test it on regular newspaper. This way you can determine the correct sizes.

1. You have cut out a rectangle of the required size from wrapping paper. Place the gift box in the center of the paper.

2. Now you need to bend the left or right vertical edge by about 0.5-1 cm and stick double-sided tape to the fold.

3. The gift box must be wrapped tightly. Remove the film from the tape and glue the folded edge of the wrapping paper.

4. The top part of the wrapping paper needs to be folded as shown in the picture. It must be pressed tightly against the end of the box.

5. The side parts must also be bent and pressed tightly.

6. To secure the lower part neatly, you need to bend it and press it against the end of the box. After this, you need to bend this part and bend it again, but now in the middle.

7. Glue tape to this part and attach it to the end of the box.

8. Repeat the same process on the other side.

How to decorate a gift. Option 1.

First you need to cut out a paper strip of a different shade. Wrap this strip around the box and seal the ends with tape. You can add decorative cord.

How to decorate a gift with your own hands. Option 2.

This option can be used if you have a double-sided wrapping paper. Leave more paper around the width and use this part for decoration.

How to decorate a gift box. Option 3.

Try using several different colored satin ribbons.

How to beautifully decorate a gift. Option 4.

A lace ribbon can also help decorate a gift. Wrap it around the gift wrap and secure the ends with double-sided tape.

How to wrap a gift beautifully

You will need:

Roll of wrapping paper

Double sided tape

Scissors

Bright ribbon

1. Prepare a roll of gift paper, unroll it on a flat surface (table) with the pattern down (wrong side up).

2. Take the gift box and turn it upside down. Next, place the box on gift paper.

3. Trim the paper, leaving a margin of approximately 2-3 cm.

4. Stand on the side where you have the roll. Stretch the paper on the opposite side and secure it with double-sided tape.

5. Unroll the wrapping paper and cover the entire box with paper. You also need to cover that part of the box that is slightly covered on the opposite side. The paper should extend beyond the edge of the box by about 2-3 cm.

6. Bend a margin of 2-3 cm inward and secure it to the box along the fold using double-sided tape.

7. The ends of the paper sticking out from the side need to be folded inward. You need to make four sashes that bend at an angle of 45 degrees. Next, bend the paper along the flaps.

8. The top flap must be carefully bent to obtain even corners. To achieve this, you need to bend along the top edge of the gift. Next, the sashes need to be bent again to get a line along which you can cut off the excess with scissors. Once you have cut off the excess paper, glue it to the box.

9. Do the same with the bottom sash.

10. Repeat steps 7, 8 and 9 for the other side of the box.

11. Prepare a bright ribbon that should be about five times longer than the box. Place the wrapped gift upside down on the ribbon, pull it tight and wrap the gift as shown in the picture.

12. Turn the box over. The ribbon needs to be tied in a double knot and made into a bow.

13. You can cut a triangle at the ends of the ribbon.

How to wrap a gift with your own hands. Wedding option.

You will need:

Light colored wrapping paper

Satin ribbons

Beads

Lace

Double sided tape

Scissors

Stapler.

1. First you need to measure out the required amount of wrapping paper - just take the necessary measurements. It is worth noting that in this case, the width of the paper must be calculated so that the gap between A and B is about 1-1.5 cm, taking into account that edge A is bent by 0.5 cm.

2. Place a strip of tape on edge B of the wrapping paper. This should be done from the front side and at a distance of about 1-1.5 cm from the edge.

3. Prepare a lace ribbon - its length should be 2 times the length of the wrapping paper.

4. Remove the protective film from the double-sided tape and glue the lace to the paper.

Some items, often chosen as gifts, still do not have the classic rectangular shape of the store-bought cardboard packaging. And above all, this applies to children's and sports items and accessories. But besides them: tricycles, rackets, individual items of utensils, small home exercise equipment, bottles of alcohol, clothes, soft toys - in fact, the list is huge.

You can, of course, spend a lot of time and find a separate cardboard box of the ideal shape for sale, but do you know how difficult it is? Especially if you need a box that is, say, very long and at the same time very narrow or elongated, like the packaging of a thermos. You can simply throw the item into a large gift bag, but it looks and is perceived as frankly “not comme il faut.”

The article below will tell you how to solve this problem with ease and elegance.

1. If you have it in your hands soft clothes, blanket, scarf or other formless ones, but they are not too large analogues

Then we put the resulting material on thin cardboard (can be covered with colored paper) and twist it together with the cardboard into a cylinder so that the edges of the cardboard overlap at least a little.

Using transparent adhesive tape, glue the edge of the cardboard to the cylinder in one place - this will be enough.

We wrap the roll in a large sheet of decorative wrapping paper, the edge of which is also sealed with transparent adhesive tape in several places.

We squeeze the side parts of the paper extending beyond the boundaries of the cardboard cylinder with our fingers, forming a kind of large candy.

Finally, we tie the sides with ropes, raffia or something similar (ribbons will look too vulgar and tasteless, but if the gift is for a child, you can take very thin ribbons of a soft shade). Ready!

2. For single glasses/mugs and analogues In terms of shape and size, medium-density fabric with a beautiful pattern is perfect. We place the mug in the center of a large piece of material, gather the material at the top above the mug and tie it with a large ribbon of a contrasting but matching shade. Straighten the top of the bag over the bow. Ready! You can place a circle of thick cardboard covered with colored paper on the fabric under the mug - to stabilize the gift and give an improved shape to the bag. The mug can be glued to this circle with double-sided adhesive tape at the bottom.

3. Rackets put it in a long rectangle of thick cardboard, folded in half, but folded so that the height of the fold is equal to the height of a stack of rackets or one wide tennis racket. And then we pack all this beauty in paper, like a regular rectangular gift.

4. Under huge soft toys or their analogues, which are dangling parts on thin “handles”/“legs”, we place cardboard approximately the same width as the toy itself. At the same time, we place the “bumpy” toy in some beautiful pose. Next, we place the animal on cardboard on a huge piece of beautiful thin fabric or crepe paper - in the center - and also collect the material at the top, as in step 2. We tie the gift on top with a medium-width ribbon. The point here is that the fabric should not be colorful, and that the ribbon should have an interesting, complex pattern.

5. In case alcohol bottles You can come up with a lot of things (wrap it in a wide strip of crepe paper, put it in a bag or “bag” made of fabric, as described above, etc.), but our option is to start by cutting off the sleeve from a clean unnecessary shirt. The length of the cut is equal to the height of the bottle. Turn the sleeve inside out and glue or stitch together the edges of the sleeve at the cut site. We turn the resulting bag right side out, put the bottle inside, gather the sleeve at the top, and tie a bow. Turn the sleeve over onto the bow. All!

6. Finally, if none of the methods described above suit your non-standard-shaped gift, still take a gift bag that fits the size of the gift, but buy a large amount of decorative filler for it, for example, in the form of many crumpled thin strips of colored paper, and Place the filler wherever there are voids under and above the gift in the bag. Then completely cover the gift in the bag with a good layer of the same filling, staple the edges of the bag on top in several places, and place a bow of the appropriate size on the front edge. This is the only way the gift in the bag will be truly wrapped, and not just “thrown” into a bag.

If you find an error, please select a piece of text and press Ctrl+Enter.